Description
The United States Coast Guard Surface Forces Logistics Center ICE BREAKER, BOUY AND CONSTRUCTION TENDER Product Line has a requirement and requesting quotations for the following part: Item: 1 NSN: 2040 01-F11-2290 KEEL COOLER DURACOOLER PART NUMBER SC-216DP-63, WITH THE FOLLOWING FEATURES: OVERALL LENGTH: 66-1/2 INCHES OVERALL WIDTH: 11-1/8 INCHES, OVERALL PROJECTION FROM HULL TO BOTTOM OF ZINC ELECTRODE: 2-7/8 INCHES INLET AND OUTLET PIPING CONNECTIONS: 1-1/2 INCH NPS NOZZLES BOTH LOCATED 1-3/4 INCHES FROM SAME END OF COOLER, COOLING CIRCUIT: SINGLE HEAT REJECTION: 5863 BTU/MIN FRESH WATER FLOWRATE: 33 GPM MIN RAW WATER FLOW PAST COOLER TUBES (KNOTS): 0 MAXIMUM SEA WATER TEMPERATURE: 85 DEGREES F. COOLER MATERIAL: COPPER-NICKEL. MFG NAME: DURAMAX INC PART_NBR: SC-216DP-63 Quantity: FOUR (4) Item: 2 NSN: 3120 01-599-4857 BEARING, PLAIN, SPHERICAL DURAMAX CODE DX450 RUDDER BUSHING. ID 4.42, OD 6.02, L 17. FITS STEERING AND FLANKING RUDDERS. P/N: 812100114 MFG NAME: DURAMAX INC PART_NBR: 812100114 Quantity: FOUR (4) The items are used on various US Coast Guard vessels. All items will be individually packaged IAW ASTM-D-3951 and each item to be individually marked IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD. THIS IS A SOLE SOURCE REQUEST FOR QUOTE AND IT IS BELIEVED THAT THE OEM DURAMAX INC. IS THE ONLY COMPANY THAT CAN SUPPLY THE PROPER PARTS The Coast Guard did not purchase the manufacturer's proprietary data rights, and therefore, cannot determine with certainty that an alternative part number would mount to, interface with, or operate effectively with Coast Guard Cutters. Failure of an alternative part, not conforming to the OEM's specifications, could cause damage to the cutters. The manufacturing drawing and specifications have not been purchased by the Coast Guard. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-83 (02 Jul 2015) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 336310 and the Small Business Size Standard is 500. This synopsis/solicitation is issued pursuant to FAR 6.302-1. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.5. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with Central Contractor Registration (CCR) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is JULY 24, 2015 at _2:30_ p.m. Eastern Standard Time. OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (JUN 2008); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (11/25/13) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov. FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Nov. 2014); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (11/25/13). The following clauses listed within FAR 52.212-5 are applicable: FAR 52.219-28, Post Award Small Business Program representation (Apr 2009)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Mar 2012) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Feb 1999); FAR 52.222-26, Equal Opportunity (Mar 2007)(E.O. 11246); FAR 52.222-36 Affirmative Action for Workers with Disabilities (Oct 2010) (29 U.S.C. 793); FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); (SEP 2009); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf