Round Umbrella Tanks

This is a combined synopsis/solicitation for commercial item prepared in accordance with the format in Subpart 12.6 as supplemented with additional included in this notice. This announcement constitutes the only solicitation:proposals are being requested and written solicitation will not be issued. Material Specifications Round Umbrella Tank (Quantity: 5) • Minimum 4500-gallon capacity • Maximum 12 foot (144 inches) width (diameter) and 8 foot (96 inches) tall • Minimum 3 anchoring attachments located near the top of tank • 5 foot (60 inches) apron wings attachable with bolts • Adequate apron wing support arms • Metal-screened collection port on top center of tank • Constructed with galvanized metal (minimum thickness listed below) o 12 gauge bottom o 14 gauge corrugated sides o 16 gauge top o 16 gauge apron wings • 1" threaded line-out port at bottom edge of tank (drain) • 1" threaded line-out port at top edge of tank (overflow) • Needed no later than June 1, 2019. Included in the cost estimate must be delivery to a USFS storage facility near the physical address of 635 Piedmont, Taos, NM 87571. The storage facility is located approximately 0.3 miles northwest of the aforementioned address. The facility is accessible via a gravel road. At least one USFS employee will be on-site at the time of delivery to inspect materials and direct product placement.