Description
This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This requirement is designated a Sole Source in accordance with FAR 13.106-1(b)(2). A written solicitation will not be issued. Solicitation/Purchase Request number AG-6424-S-10-0005. This document incorporates provisions and clauses that are in effect through Federal Acquisition Circular 2005-38 effective 01 February, 2010. The Government intends to award one contract line item number (CLIN 0001) for Audio Visual Equipment Lease and Support Service in accordance with the attached Performance Work Statement (PWS). QUANTITY: one (1). UNIT OF MEASURE: Week. DESIRED PERIOD OF PERFORMANCE: March 13, 2010 through March 20, 2010. FOB: Kansas City, Missouri. Inspection and acceptance: Kansas City, MO. In accordance with the FAR 13.106-1(b)(2) award will be made on the basis of single source. Offeror will be evaluated in accordance with FAR 13.106-2. FAR 52.212-4 Contract Terms and Conditions-Commercial Items; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items. [in paragraphs (b) and (c) the following clauses apply; 52.222-3; 52.225-21; 52.222-26; 52.222-36; 52.232-33; 52.222-41; 52.222-42; 52.222-44; Addendum to FAR 52.212-5: FAR 52.252-2, Clauses and provisions may be accessed in full text at http://farsite.hill.af.mil/ Department of Labor (DOL) Service Contract Act (SCA) Wage Determination (WD) Number 13011 applies to this acquisition. ADDITIONAL INFORMATION: Be advised that all interested parties must be registered in the Central Contractor Registration (CCR) Database in order to receive an award. If you are not registered you may request an application at (888) 227-2423 or through the CCR website at http://www.ccr.gov. 52.222-42 -- Statement of Equivalent Rates for Federal Hires. As prescribed in 22.1006(b), insert the following clause: Statement of Equivalent Rates for Federal Hires (May 1989) In compliance with the Service Contract Act of 1965, as amended, and the regulations of the Secretary of Labor (29 CFR Part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C. 5341 or 5332. This Statement is for Information Only: It is not a Wage Determination Employee Class Monetary Wage -- Fringe Benefits Exhibit Specialist I $31,315.23 (End of Clause) WD 05-2307 (Rev.-9) was first posted on www.wdol.gov on 10/27/2009 ***************************************************************************** ******* REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION By direction of the Secretary of Labor | WAGE AND HOUR DIVISION | WASHINGTON D.C. 20210 | | | | Wage Determination No.: 2005-2307 Shirley F. Ebbesen Division of | Revision No.: 9 Director Wage Determinations| Date Of Revision: 10/16/2009 _______________________________________|_____________________________________ _______ States: Kansas, Missouri Area: Kansas Counties of Anderson, Atchison, Doniphan, Douglas, Franklin, Johnson, Leavenworth, Linn, Miami, Wyandotte Missouri Counties of Adair, Andrew, Atchison, Bates, Buchanan, Caldwell, Carroll, Cass, Chariton, Clay, Clinton, Cooper, Daviess, De Kalb, Gentry, Grundy, Harrison, Henry, Holt, Howard, Jackson, Johnson, Lafayette, Linn, Livingston, Macon, Mercer, Nodaway, Pettis, Platte, Putnam, Ray, Saline, Schuyler, Sullivan, Worth _____________________________________________________________________________ _______ **Fringe Benefits Required Follow the Occupational Listing** OCCUPATION CODE - TITLE FOOTNOTE RATE 01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.97 01012 - Accounting Clerk II 15.69 01013 - Accounting Clerk III 17.77 01020 - Administrative Assistant 21.80 01051 - Data Entry Operator I 12.33 01052 - Data Entry Operator II 14.14 01070 - Document Preparation Clerk 13.03 01111 - General Clerk I 12.50 01112 - General Clerk II 14.03 01113 - General Clerk III 15.79 01261 - Personnel Assistant (Employment) I 16.17 01262 - Personnel Assistant (Employment) II 17.97 01263 - Personnel Assistant (Employment) III 19.80 01270 - Production Control Clerk 19.03 01290 - Rental Clerk 14.97 01311 - Secretary I 15.41 01312 - Secretary II 17.90 01313 - Secretary III 20.79 01320 - Service Order Dispatcher 21.18 01410 - Supply Technician 23.09 01611 - Word Processor I 12.92 01612 - Word Processor II 15.11 01613 - Word Processor III 16.44 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.11 13012 - Exhibits Specialist II 27.35 13013 - Exhibits Specialist III 29.94 13041 - Illustrator I 18.65 13042 - Illustrator II 22.33 13043 - Illustrator III 27.90 13061 - Media Specialist I 17.03 13062 - Media Specialist II 19.04 13063 - Media Specialist III 21.24 13071 - Photographer I 16.73 13072 - Photographer II 19.05 13073 - Photographer III 23.18 13074 - Photographer IV 28.36 13075 - Photographer V 34.32 13110 - Video Teleconference Technician 17.91 14000 - Information Technology Occupations 14041 - Computer Operator I 16.03 14042 - Computer Operator II 17.93 14043 - Computer Operator III 19.99 14044 - Computer Operator IV 23.48 14045 - Computer Operator V 24.61 14071 - Computer Programmer I (see 1) 22.38 14072 - Computer Programmer II (see 1) 26.04 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.03 14160 - Personal Computer Support Technician 23.48 23931 - Telecommunications Mechanic I 23.21 23932 - Telecommunications Mechanic II 23.95 23950 - Telephone Lineman 23.29 30000 - Technical Occupations 30081 - Engineering Technician I 15.54 30082 - Engineering Technician II 19.08 30083 - Engineering Technician III 21.95 30084 - Engineering Technician IV 24.41 30085 - Engineering Technician V 29.54 30086 - Engineering Technician VI 36.00 30090 - Environmental Technician 20.48 30210 - Laboratory Technician 20.04 30240 - Mathematical Technician 23.94 30390 - Photo-Optics Technician 23.94 30461 - Technical Writer I 19.76 30462 - Technical Writer II 24.16 30463 - Technical Writer III 29.23 _____________________________________________________________________________ _______ ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS: HEALTH & WELFARE: $3.35 per hour or $134.00 per week or $580.66 per month VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 8 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173) HOLIDAYS: A minimum of ten paid holidays per year, New Year's Day, Martin Luther King Jr's Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4174) THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING: 1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541. 400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination. Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of: (1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications; (2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications; (3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or (4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400). 2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am. If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work). HAZARDOUS PAY DIFFERENTIAL: An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordinance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving regrading and cleaning of artillery ranges. A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordance, explosives, and incendiary material differential pay. ** UNIFORM ALLOWANCE ** If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance: The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs. The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition, April 2006, unless otherwise indicated. Copies of the Directory are available on the Internet. A links to the Directory may be found on the WHD home page at http://www.dol. gov/esa/whd/ or through the Wage Determinations On-Line (WDOL) Web site at http://wdol.gov/. REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE {Standard Form 1444 (SF 1444)} Conformance Process: The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination. Such conformed classes of employees shall be paid the monetary wages and furnished the fringe benefits as are determined. Such conforming process shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees. The conformed classification, wage rate, and/or fringe benefits shall be retroactive to the commencement date of the contract. {See Section 4.6 (C)(vi)} When multiple wage determinations are included in a contract, a separate SF 1444 should be prepared for each wage determination to which a class(es) is to be conformed. The process for preparing a conformance request is as follows: 1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s). 2) After contract award, the contractor prepares a written report listing in order proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work. 3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the Wage and Hour Division, Employment Standards Administration, U.S. Department of Labor, for review. (See section 4.6(b)(2) of Regulations 29 CFR Part 4). 4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request. 5) The contracting officer transmits the Wage and Hour decision to the contractor. 6) The contractor informs the affected employees. Information required by the Regulations must be submitted on SF 1444 or bond paper. When preparing a conformance request, the "Service Contract Act Directory of Occupations" (the Directory) should be used to compare job definitions to insure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination.