Z--ROCHESTER, NY--UPGRADE EMERGENCY POWER AT USCG STATION ROCHESTER, NY.

Provide all labor, material, transportation, equipment and supervision required to Upgrade Emergency Power @ USCG Station Rochester, NY as follows: Furnish and install 60 KW, 208Y/120V, 3 phase, 4 wire diesel generator with sub base tank in weather housing and connect as shown on drawings. Disconnect & remove the existing 50A weatherproof receptacle and manual transfer switch and their associated wire and conduit as shown on sheet drawing. Furnish & install new 800 amperes, 208Y/120 volts, 3 phase, 4 wire automatic transfer switch and connect as shown on drawings. Furnish and install new concrete pad and plywood mounting panel at new automatic transfer switch. Reroute the existing incoming service from existing C.T. box to new automatic transfer switch as shown on drawing. Provide portable generator to feed Panel “DP1” (feeding emergency panel, gas pump, outside lights and shore tie) and must remain operational while performing the above work. Replace the existing panel “DP1” and emergency panel “LP-EM” with new and reconnect the existing circuits as shown on drawing. Furnish and install new 225A & 50A, 3 pole breakers in existing main distribution panel “MDP-Section 1” and connect to feed new “DP-1” and new“DP-2”. Provide portable generator to feed the communication room console during the above work. Do not start construction until new generator is onsite. PHASE I – Install new 60 KW diesel generator and its associated wire and conduit. PHASE II – Install new underground electrical utilities and connect to new generator and test the generator. PHASE III – Remove existing weatherproof 50A receptacle and manual transfer switch. PHASE IV – Install new 800A automatic transfer switch in electrical room and reroute the existing incoming service to new automatic transfer switch and connect. PHASE V – Replace existing (2) single phase panels in electrical room with two new 3 phase panels and reconnect the existing circuits. Period of performance is 119 DANTP. This procurement is estimated between $25,000 and $100,000. This procurement is a Total Small Business Set-Aside. The applicable NAICS is 238210 with a Small Business Size Standard of $13.0. All responsible sources may submit an offer that will be considered by the agency. NO TELEPHONE OR WRITTEN REQUESTS FOR SOLICITATIONS OR POSTING STATUS. The solicitation documents will be available for download exclusively from the Internet by accessing the government-wide Federal Business Opportunities (FedBizOpps) website at http://www.fbo.gov. Interested parties are encouraged to register at the website to be notified when information on this project is uploaded. Any amendments issued to this solicitation will be posted solely to the FedBizOpps website. NOTE: For security reasons, the Coast Guard now distributes the Technical Data Package (TDP) portion of solicitations through the Federal Technical Data Solution (FedTeDS) website. In order to obtain the TDP, the contractor is required to register in the Central Contractor Registration (CCR) database and have a Marketing Partner Identification Number (MPIN). For information on CCR and the MPIN, access the website at: http://www.ccr.gov/vendor.cfm.