USCGC Maria Bray DPS Service Tech

This is for informational purposes only. This has been awarded VIA JOTFOC. 1.0 PR #: 52000PR260002240 STATEMENT OF WORK LAST UPDATED: 12/29/2025 PAGE 1/1 STATEMENT OF WORK (SOW) FOR CGC MARIA BRAY DPS Technical Support from Nacos Marine CGC MARIA BRAY DPS (Dynamic Positioning System) is not working as intended and cutter technicians have exhausted efforts with support over the phone with Nacos Marine tech. Cutter CO and technicians have requested on-site technical support. The DPS is relied upon for WLB-225 and WLM-175 assets for holding station while working on navigation aids. Without a properly functioning DPS system the cutter is unable to safely perform required operational missions. The Nacos Marine technician will be on-site to observe current DPS operation and make any software or physical hardware changes/updates required to bring the system back to SAT operation. 1.1 OBJECTIVE The goal is to supply CGC MARIA BRAY with OEM technical support from Nacos Marine in order to regain full DPS system functionalility to allow unit to perform operational requirements for aids to navigation and various other Southeast District operatoins. Item Description Part / Item Number DPS (Dynamic Positioning System) DPS system holds cutter on station while working on aids to navigation and performs autopilot function while transiting. The DPS receives multiple navigation sensor inputs to quickly make functional adjustments to the operation of shaft speed and bow/stern thrusters to keep the cutter safely on station during dangerous buoy deck evolutions. • One Nacos Marine technician will travel to CGC MARIA BRAY homeport at: 4200 Ocean St, Atlantic Beach, FL 32233. Please contact CWO Trevor Bannerman, 781-443-4695 with questions regarding this