USCGC Healy Power Supply

USCGC Power supply this is for informational purposes only. This has been awarded VIA JOTFOC. STATEMENT OF WORK (SOW) FOR Impressed Current Cathodic Protection (ICCP) System Replacement CGC Healy’s existing AQ3 ICCP Controller Power Units are obsolete and no longer supported by the OEM. Cutter is no longer able to get solid state parts to repair faults and if a major fault occurs to one of the main motherboards, protection of the hull will be compromised. Original PO# 70Z08525LREP0049 was delivered, but later identified that components were the incorrect configuration. The correct components are listed below and will allow for the installation of the replacement system. System is currently operating with no available spares and has an immediate need for the requested parts outlined in this Statement of Work (SOW). OBJECTIVE The goal is to supply CGC Healy with the parts listed in the table below. Item Description Part Number/ID Number Qty Aquamatic 4 (AQ4) Computer-Controlled Switch Mode Power Supplies in a drip-proof NEMA 3R enclosures AQ-300/36 2 The parts shall be purchased from manufacturer and must be a certified Wilson Walton part. No aftermarket substitutions will be accepted. Part is needed as soon as possible. The parts shall be individually packaged and shipped to: SFLC Attn: Forrest Heath 1519 Alaskan Way South Seattle WA, 98134 The part has a 3-week lead time. Please contact CWO2 Corry Thomas at (216) 815-2046 or [email protected] with questions regarding this SOW.