J--Relocate & Install Wheelchair Washer Northport

STATEMENT OF WORK (SOW) - Wheelchair Washer Installation Introduction and Overview: This Statement of Work is to relocate and install a wheelchair washer and the removal of a large station scale. Background: The scale in need of removal is a large 2,000 lb. inlaid, Detecto station scale. The wheelchair washer is an Aqua Phase AQ4000 sealed washer. The Wheelchair Washer's total Outer Dimensions are: Width 63 ¼" Length 96 3/4 , Height 73". Effective Chamber Dimensions-Width 40 ½" Length-93 ¾". Height 93 ¾" Objectives: VAMC Northport's wheelchair washer, once installed, will allow the station to clean our rolling stock in-house without seeking the services of an outside contractor. This will result in significant savings for Veterans Affairs. Period of Performance- Contractor is expected to complete work within 45 days of award. Place of Performance: Building 200, Scale Room near loading dock area. Scope of Work: The scope is to install a wheelchair washer and remove a large station scale. After removal of the scale, the area must be filled in with rebar and cement to make level with existing floor. The double doors in this area must be removed to install the new wheelchair washer. Connect electric to existing electrical outlets. Connect water supply to existing water lines. Test unit operation after installation. Safety Codes- It will be expected that VAMC safety codes will be adhered to with the hardware to be installed. Installers should follow safety guidelines pertaining to professional code standards. Special Material Requirements-The Aqua Phase wheelchair washer, once relocated, needs hookups to two hoses-one for hot water and one for drain. The Aqua Phase 4000 will then have to be connected to the appropriate power source.