RING SET,PISTON

Contract Specialist: Kyle Blazek Email: [email protected] NSN : 2815-00-410-1956 Approved Source(s) – KAYDON RING & SEAL, INC. 75370 P/N C5795-83 ---------------------------------------------------------------------------------------------------------- The AMC/AMSC for the NSN listed above is “3 B” AMC "3" Items found to be procured from the actual manufacturer or vendor, including a prime contractor who is the actual manufacturer. " AMSC "B" This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current various of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. If one source is available, AMCs 3, 4, or 5 are valid. If at least two sources exist, AMCs 1 or 2 are valid. ---------------------------------------------------------------------------------------------------------- Please review the NSN listed above and provide any sources that may be able to manufacture these items. The approved sources for this NSN are currently listed above. All information may be submitted directly to the Contract Specialist listed above. This information must be provided by the response date indicated above. Should a company wish to be reviewed and qualified as an “Approved Source”, they may submit an application package through the DLA Land and Maritime Alternate Offer/Source Approval Request (SAR) Program. A SAR package contains all technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality or better than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Land and Maritime is procuring. For further information, please reference the DLA Land Maritime web page shown below and click on the highlight: Alternate Offer/Source Approval Program for detailed explanation for the information and format necessary for a SAR and for the SAR approval process. http://www.landandmaritime.dla.mil/programs/altofferor/ Thank you in advance for your assistance.