23--Procurement of Ambulance Truck

This is not a request for a quote/proposal/bid. The intent of the sources ought synopsis is to identify potential offerors for Truck, Van, Ambulance Conversion, 4X2, right hand drive, gasoline engine driven and dual type air conditioners to meet the specifications below.MINIMUM DIMENSIONS (Metric/Inches). Millimeter InchesOverall Length 5,600 220.5" Width 1,850 72.8" Height 2,480 97.6Note: a. Vehicle and furnished accessories shall comply with Japanese Motor Vehicle Safety Standard in effect on the date of manufacture.REQUIREMENTS.(1) Exterior Color: Manufacturer's standard gloss white color.(2) Identification Markings and Registration Numbers (3) Ambulance Emblems and Markings:(4) Engine Displacement: 2,600 cc or more rated gasoline engine driven.(5) Battery: Manufacturer's standard heavy duty type.(6) Transmission System: Automatic transmission.(7) AM/FM Radio and Speaker.(8) Dual Types of Air Conditioners and rear heater.(9) Steering: Manufacturer's standard power steering.(10) Rust proofing and Undercoating: Manufacturer's standard.(11) Lighting: Exterior/Interior lighting will include all lights and controls as installed on manufacturer's standard domestic production model ambulance. Red colored LED type flashlights shall be consisted of two (2) at top of front bumper, one (1) front light at top of roof, two (2) rear lights at both sides of roof. Spotlights shall have magnetic backs to allow them to attach anywhere to vehicle body. Connection plug shall be installed in the cabin and left side of rear interior.(12) Standard accessories for ambulance:a. Electronic siren amplifier. b. Siren speaker. c. Fire extinguisher and bracket.d. Rear step board with steel metal bumper guard. e. Roof side storage. f. Ventilator. j. Roof nets. h. Triangle reflector. i. Waterproof type rear compartment floor. j. 1 each high back rear seat. k. 2 each folding type rear seats. l. Bench type rear side seat with seat belts. m. Easy closer system for back door. n. Main and sub stretcher. (13) Floor Mats. (14) Warranty: Manufacturer's standard.(15) Technical Publications: One (1) set of operator manual (English or Japanese), and two (2) sets of Technical (shop repair) manuals and part catalogs (English or Japanese) to be furnished by Contractor at time of vehicle (s) delivery.(16) Other Accessories: Shall be type installed on manufacturer's standard domestic production model.SAFETY. Each vehicle shall comply with Japanese domestic safety and exhaust emission control requirements.DELIVERY POINT. All transportation charges borne by the contractor. Two (2) each to the Commanding Officer, Naval Hospital Yokosuka, Japan.