Rebuild Station Eaton’s Neck Boat House at U.S. Coast Guard Station Eaton’s Neck, New York

Description. RECOVERY: THIS NOTICE IS PROVIDED FOR INFORMATION PURPOSES ONLY. This opportunity is available only to following firms: HSCG47-09-D-3EFK03 CDM Constructors Inc. One Cambridge Place 50 Hampshire St. Cambridge, MA 02139 HSCG47-09-D-3EFK20 The Haskell Company 111 Riverside Avenue Jacksonville, FL 32202 HSCG47-09-D-3EFK12 AMEC Earth & Environmental, Inc. One Plymouth Meeting, Suite 850 Plymouth Meeting, PA 19462 HSCG47-09-D-3EFK15 Bluescope Construction Inc. 1540 Genessee Street Kansas City, MO 64102 HSCG47-09-D-3EFK22 TtEC-TESORO Joint Venture 302 Research Drive, Suite 200 Norcross, GA 30092 HSCG47-09-D-3EFK23 Perini Corporation 73 Mt. Wayth Avenue Framingham, MA 01701 HSCG47-09-D-3EFK14 M. A. Morenson Company 700 Meadow Lane North Minneapolis, MN 55422 HSCG47-09-D-3EFK16 CH2MHILL Constructors, Inc. 1500 International Drive Spartanburg, SC 29303 The U. S. Coast Guard, Facilities Design and Construction will award a Firm-Fixed Price Contract Task Order against an existing Indefinite Delivery Indefinite Quantity Contract for the design and construction of a new Boat Maintenance Facility and an option item for the construction of a new boat ramp at U. S. Coast Guard Station Eaton's Neck located in Northport, New York 1. Project Description: Rebuild Station Eaton's Neck Boat House at U.S. Coast Guard Station Eaton's Neck, New York. The scope of work includes, but is not limited to, the design and construction of an approximately 9000 Gross Square Foot (GSF) boat maintenance facility. The ground level shall include a boat bay capable of housing 2-25' long RBS boats on trailers, overhead bridge crane and associated maintenance shops. A second level shall house an administrative office and locker-room facilities. Associated site work includes grading and access road construction, routing of electrical, telecommunication, compressed air and equipment, and an option item to construct a boat ramp, including partial demolition of the existing decking, piles, subsurface pile bracing, and bulkhead and stabilization of any remaining decking. Do the work according to the specifications and as shown on the Government-approved, contractor-originated drawings.