Z -- Cured-In-Place-Pipe to reinforce concrete pipe.

Sources sought for: SUBCONTRACTOR shall provide all material, labor, equipment, and quality control testing and oversight to install approximately 360 linear feet of cured-in-placed-pipe (CIPP). The CIPP is to be installed within 2-each 180 linear feet 14 inch by 23 inch class III HE (horizontal ellipse) RCP (reinforced concrete pipe). The project location is in Area 6 of the Nevada Test Site which is approximately 90 miles north of Las Vegas, Nevada. The CIPP shall be a carbon fiber reinforced laminated with the CIPP/RCP composite capable of supporting the take-off and landing loads from a C-130 aircraft. The CIPP shall be designed for a minimum 50 year life. In addition, the smooth surface of the CIPP shall increase pipe flow capacity by up to 10% depending on existing line condition. All installation work shall be entirely trenchless and completed within 24 hours for each installation segment. The structural capacity of the two existing 180? long, 14? x 23? Class III horizontal elliptical reinforced concrete pipes is to be increased to accommodate the Lockheed C-130 Hercules with a maximum weight of 155,000 pounds. The C-130 aircraft has a single-tandem wheel configuration with 105 psi tire pressure. Each of the 4 main gear wheels has a maximum load of approximately 36,800 pounds. Video inspect and clean approximately 340 linear feet of 14? x 23? pipeline. Rehabilitate approximately 340 linear feet of 14? x 23? pipe using the carbon fiber reinforcement and polyester resin.