Description
Quantity:24 boxes; Destination is New Cumberland, PA. Successful offerors must be currently active in the Central Contractor Registration ( www.ccr.gov ). 8030-01-571-1268 UI: BX SEALING COMPOUND: DESCRIPTION An aluminum-colored sealing compound for use in preventing corrosion between dissimilar metals. Size: a box of twelve 10.5 fl oz cartridges Shelf life code: 2 (6 months) Maximum age on delivery: 1 month Adco Products Inc. part number Dolphin 6072. ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) shelf life monitoring data including starting dates of manufacture and stop/check dates of reinspection or expiration (3) manufacturer's name and part number (4) instructions for use on unit containers only (5) instructions for storage, i.e. do not freeze, refrigeration required, etc. (6) maximum volatile organic content (VOC) less water and exempt solvents in grams per liter or pounds per gallon. (7) if the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PACKAGING PACKAGING: The product shall be furnished in the specified quantities packaged in the manufacturer's original containers and in accordance with normal commercial practice. There shall be no interaction chemically or physically with the contents so as to damage the containers or alter the strength, quality, or purity of the contents. The filled containers shall be closed in a manner that will insure the contents will not spill or leak from the containers during shipment, handling, storage, and redistribution. PACKING PACKING: Not more than 25 cartridges of material packaged as specified above shall be vertically packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 burst, 32 min. ECT). The cartridges shall be packed in a manner, including full height partition cells if necessary, that will prevent damage to the cartridges during shipment, handling, storage, and redistribution. Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/. South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.