61--Activation Bldg 145 SCC Smart APC Uninterupted Power Supply Intent to Orally Solicit - Set-aside for SD/VOSBs

Brand Name APC Smart-UPS RT 5000VA RM 208V to 208/120 SURTD5000RMXLP3U or Equal Smart UPS Rack Mounted Network UPS/Power Conditioner/Surge Suppressor (Qnty. 6) UPS must have the following minimum runtimes for the number of watts used: Watts Runtime 200 watts 182 minutes 500 watts 76 minutes 700 watts 54 minutes 900 watts 40 minutes 1000 watts 36 minutes 1300 watts 26 minutes 1600 watts 20 minutes 2000 watts 15 minutes 2500 watts 11 minutes 3000 watts 8 minutes 3400 watts 7 minutes 4000 watts 5 minutes Must have built in power conditioning to protect devices from surges, spikes, lightning and noise to include when connected to generator. Must provide reliable use during unstable and severe power conditions. Must have minimum of 6 battery and surge protected outlets Must have built in Test Button on front of unit Must have resettable circuit breaker Must have ethernet, USB and Serial connections that allow for network management Must have Temperature compensated Battery charging Must have auto restart after UPS Shutdown Must have input power factor correction Must be Generator Compatible Must be Cold Start Capable if complete power outage occurs Must be Safety Agency Approved Must have built in Frequency and Voltage Regulation Must have 208V nominal input voltage and support simultaneous dual 120V/208V output voltage Must have multiple output voltages to power equipment in cabinet to include 48Vdc, 24Vdc and 120Vac Must have scalable, uninterrupted runtime Power Must have serial port Must have audible alarms Must have disconnected battery notification Must have automatic self-test Must provide predictive failure notification Must have SmartSlot that allows for customization of UPS with management cards Must be able to hot-swap batteries (plug and play) with unit plugged in Must have Flash Upgradable Firmware Must have minimum 16 segment LED display with easy integrated indicators Must have pure sine wave output while on battery to ensure compatibility with Power Factor Corrected Services and Sensitive Electronics Must have preinstalled and operational network management card installed and tested/operational by manufacturer of device AP9631 SmartSlot Network Management Card which enables UPS management and environment monitoring -both temperature and humidity control with system connect to the network. Must have minimum ability of eight users accessing system simultaneously via web browser. Must have minimum ability for three individuals to access network command line interface simultaneously. Must be compatible with PowerChute Software. Built Card must have ethernet, USB (qty 2) and Serial connections that allow for network management. Card must be capable of operating on network using IPv6 protocol. Card must feature device encryption to securely connect via HTTPS/SSL, SSH up to 2048 bit encryption and SNMPV3. Built in card must monitor temperature and humidity and provide reports to end user when it goes out of set ranges. Enviro controls must be able to be monitored remotely. Must be capable of operating on network using IPv6 protocol. Card must feature device encryption to securely connect via HTTPS/SSL, SSH up to 2048 bit encryption and SNMPV3. Card must have RADIUS support. Card must have SMTP Authentication SSL/TLS. Card must have FTP, CLI and TELNET access support. Card must have secure SSH and HTTPS access. Card must have SNMP v1,v2, v3 support. Card must be able to help identify problematic trends/issues through data and event logging. UPS System must have intelligent self-battery management which conducts automatic self-tests periodically. Tests must assess current battery conditions and also notify users of batteries need replacements. Must be compatible with PowerChute Network Shutdown Software Must have Rack Mounted Support Rails Must include all hardware for rack mounting Must have Smart-UPS Signaling RS-232 Cable Must come with USB Cable Must Come with User Manual Input Connection NEMA L14-30P Output Connection: NEMA 5-20R, NEMA L14-30R, NEMA L6-30R Warranty: Minimum of two year warranty Smart UPS Rack Mounted Network UPS/Power Conditioner/Surge Suppressor Integrated Network Card Must be compatible with above salient characteristics/Smart UPS unit - APC Must be compatible with PowerChute Software Must have ethernet, two USB connections and an RS 232 Serial connection that allow for network management Must be capable of operating on network using IPv6 protocol Must feature device encryption to securely connect via HTTPS/SSL, SSH up to 2048 bit encryption and SNMPV3 Must have RADIUS support Must have SMTP Authentication SSL/TLS Must have FTP, CLI and TELNET access support Must have secure SSH and HTTPS access Must have SNMP v1,v2, v3 support Must be able to help identify problematic trends/issues through data and event logging. Must have minimum ability of eight users accessing system simultaneously via web browser. Must have minimum ability for three individuals to access network command line interface simultaneously. Must be able to remotely and seamlessly update UPS firmware via web browser interface. Must be able to remotely reboot equipment and be able to manage device remotely Must be browser accessible Must have remote fault notification and be enterprise management system compatible Must have password security Must have user manual Warranty: Minimum 2-year warranty