Description
The U.S Army Corps of Engineers is seeking a competent and qualified contractor to repair the motor, motor controller and associated safety devices for the ski lift at Whitetail Ridge Ski Area, Fort McCoy, Wisconsin. The Ski Lift is currently maintained and serviced by Dopplemayr, Inc. It's the intent of the USACE Huntsville Center to sole source this requirement to Dopplemayr if no other contractor shows interest and a capability to perform this requirement before the announcement closing date. The drive controllers and safety circuits for ski lifts and t-bar are designed specifically to work together to control speed and load during operation. The drive is built to comply with the national code requirements set by ANSI. The code requires specific safety circuit to be built into the drive for example, field loss, phase loss, over current, over temperature and over speed. All of these circuits and more are connected to the drive and controller and are displayed when they occurred. The new controller is designed to receive specific voltage and resistance from each safety circuit. This prevents the lift from starting if there is a short in one of the safety circuits and the by-passing of any circuit. - The contractor shall provide all tools, labor, equipment, supervision, transportation and materials necessary. Work is to be done in accordance with all existing Federal, State and local codes. - Contractor shall be responsible for the termination of all electrical connection servicing the ski lift without affecting the operation of other mechanical and electrical systems in use at the Whitetail Ridge Ski Area. - Contractor shall provide all debris control necessary to perform this work in conjunction with the ski area normal operations and coordinate with the COR his activities. - Demolition Work; Contractor shall disconnect, remove and dispose of the existing ski lift motor. - Contractor shall disconnect and remove existing motor and controller and replace with new motor and controller compatible with ski lift. - The Contractor shall provide and pay for on-site containers and disposal fees for waste materials, debris, and rubbish. These materials, debris, and rubbish shall be disposed of in a licensed sanitary landfill off of Fort McCoy in accordance with State of Wisconsin regulations. - Various materials shall be recycled at sites located at Fort McCoy, Wisconsin or other licensed recycling facilities. These materials include concrete, mixed paper, plastics (PETE#1 and HDPE#2), asphalt, cardboard, metals, drywall, wood and aluminum cans. The Contractor shall separate these materials and haul them to the various sites designated at Fort McCoy or other licensed recycling facilities. Other materials shall be separated and hauled to recycling or disposal centers off of Fort McCoy at the Contractor's expense. If your firm is interested in performing this work please send a brief capabilities summary that shows your firms ability to perform the indicated work, as well as, a company point of contact for this requirement to the government POC's listed on the FBO announcement.