FN1320-11

SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS Solicitation FN1320-11 Federal Prison Industries (FPI), which operates under the trade name UNICOR, is a wholly-owned Government Corporation within the Department of Justice, under the Federal Prison System. The Corporation was created by Congress in 1934, and provides employment, education, and training opportunities to inmates under Federal custody. UNICOR, operates approximately 99 factories in over 64 locations. Its production lines are extensive and includes over 250 different products and services sold to other Federal Agencies and the Department of Defense. This solicitation is intended to result in a Firm Fixed Price, Indefinite Quantity Type of contract Performance for this requirement is for one base year with four, one year optional periods if exercised. The following information pertains to the Standard Form 1449 Solicitation: - The offer acceptance period is 60 calendar days. - Block 25, Funds will be obligated by delivery order and not by the contract itself. - The period of performance for this requirement is date of award through one (1)base year with four option years if exercised. This solicitation will result in a Indefinite delivery indefinite quantity type contract for tool sharpening services and purchase of replacement blades on an as need basis for UNICOR FCC Coleman, FL. - Offers must repair and return blades within 7 business days after pickup from UNICOR Coleman unless written authorization is provided by Coleman for a longer period of time. If tools cannot be repaired, offerors shall Notify UNICOR Coleman within 48 hours after pickup. - Deliveries are made F.O.B. Destination (Which shall include transportation charges). - All offerors must complete the Business Management questionnaire in Section L of solicitation document with three references. References must be for same or similar items. - Fax proposals are accepted at 352-330-8149, Attn: James Mitchell or email [email protected], the fax cover sheet shall reference the solicitation number and offer closing date and time, email subject shall reference the solicitation number. Original proposal shall be received within 2 days of offer closing date at UNICOR, FCI Schuylkill, Route 901 and Interstate 81, Minersville, Pa 17954. The envelope for the solicitation documents shall be clearly labeled with the solicitation number FN1320-11. Solicitation closes on May 27, 2011 at 14:30 eastern standard time. No offers will be considered after this time. - All offerors must be registered in the CCR database to be *eligible for award. If you have not registered in the CCR you may do so by logging onto and click on start new registration. - All offerors must acknowledgment all amendments. - The offer acceptance period is 60 calendar days. - Block 25, Funds will be obligated by each delivery order and not by the contract itself. - Place of Delivery: FCC Coleman, 846 NE 54TH TERRACE , Coleman, FL 33521 - All solicitations (also future procurement) and any other information (amendments, etc) may be obtained through Febizops.gov. SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENTS STATEMENT OF WORK: The offeror is required to pickup tools which require sharping services, and re-tipping from FCC Coleman and re-deliver the sharpening tools to FCC Coleman, FL within 7 business days of the pickup unless written authorization is provided by Coleman for a longer period of time. If tools cannot be repaired, offerors must notify UNICOR Coleman within 48 hours after pickup. A written delivery order will be placed with the contractor when the tools need servicing. The contractor is required to perform sharpening tool services, and re-tipping of blades. The offeror shall include labor, material, and shipping costs in the unit price. The delivery order will provide types, sizes and teeth of blades that need sharpening and/or re-tipping. The number of blades to be serviced will vary and will be specified on each delivery order. Upon pickup of blades, the contractor will examine blades and notify UNICOR within 24-hour of the work required on blades. A modification will be issued only if the services differ from the requested order and both parties agree. (For example if 15% of any blade teeth have to be repaired; it may be in the governments best interest to purchase a new blade). The contractor is required to re-sharpen tools and return to FCC Coleman within 7 business days. The contract resulting from this procurement is a firm fixed indefinite delivery indefinite quantity type contract. The period of performance is for one base year and four option periods if exercised. Offeror must bid on all items for base and option years to be considered for award. SHARPENING ITEMS: BELOW IS A LIST OF BLADES AND BITS BY DIMENSION USED: 1.-10" DIAMETER WITH 80 TEETH 2.-10" DIAMETER WITH 60 TEETH 3.-10" DIAMETER WITH 40 TEETH 4.-SPECIAL HOGGING BLADES 10" DIAMETER WITH 108 TEETH 5.-SPECIAL HOGGING BLADES 12" DIAMETER WITH 108 TEETH 6.-8" DIAMETER WITH 30 TEETH 7.-4" DIAMETER WITH 6 TEETH 8.-6" DIAMETER WITH 36 TEETH 9.-6" DIAMETER WITH 24 TEETH 10.-5" DIAMETER WITH 9 TEETH 11.-10" DIAMETER WITH 72 TEETH 12.-8" DIAMETER WITH 42 TEETH 13.-8" DIAMETER WITH 36 TEETH 14.-4" DIAMETER WITH 20 TEETH 15.-3 1/4" DIAMETER WITH 20 TEETH 16.-15" DIAMETER WITH 60 TEETH 17.-14" DIAMETER WITH 24 TEETH 18.-ROUTER BITS 3/4" DIAMETER 2 FLUTE 19.-ROUTER BITS 3/4" DIAMETER 1 1/8 FLUTE 20.-ROUTER BITS 1/2" DIAMETER 1 3/4 FLUTE 21.-ROUTER BITS 1/2" DIAMETER 1 1/4 FLUTE 22.-ROUTER BITS 1/2" DIAMETER 1 FLUTE 23.-BRAD POINT DRILL BITS 19/32" DIAMETER 19/32 FLUTE 24.-BEARING ROUTER BIT 1/2" DIAMETER WITH 1 3/4 FLUTE 25.-ROUTER BITS 2" DIAMETER WITH 1/2 X 1/4 FLUTE 26.-ROUTER BITS 1/4" DIAMETER WITH 3/8 X 1/4 FLUTE 27.-RADIUS BIT 1/2" DIAMETER WITH 1/4 FLUTE 28.-DRILL BITS 5/16" DIAMETER WITH 6 FLUTE 29.-T-SLOT BLADE 30.-MULTI-SPUR BITS 31.-2" DIAMETER WITH 6 TEETH (KERF-CUTTER) 32.-ROUTER BITS 1/2" DIAMETER WITH 2" FLUTE UNICOR may add similar items to the awarded contract through a modification issued by the contracting officer. SECTION D - PACKAGING AND MARKING Preservation, packaging, and marking for all items covered by this contract shall be in accordance with commercial practice and adequate to insure acceptance by common carrier and safe arrival at destination. The contract number should be on or adjacent to the exterior shipping label. Each package received must be marked for type and quantity. A Certificate of Conformance must accompany each shipment. ALL SHIPMENTS RECEIVED WITHOUT A CERTIFICATE OF CONFORMANCE (coc) WILL NOT BE PROCESSED FOR PAYMENT UNTIL A COC IS PROVIDED. All shipments should be labeled as follows: All shipments should be labeled as follows: a. Vendor name b. Purchase Order number and/or Contract number c. Item description d. Item quantity and weight e. Other pertinent information Delivery hours are as follows: Delivery hours are Monday through Friday, 8:00 am to 2:30 pm, excluding Federal Holidays. SECTION E - INSPECTION AND ACCEPTANCE E.1 52.246-16 Responsibility for Supplies. APR 1984 E.2 52.246-15 Certificate of Conformance (Apr 1984) (a) When authorized in writing by the cognizant Contract Administration Office (CAO), the Contractor shall ship with a Certificate of Conformance any supplies for which the contract would otherwise require inspection at source. In no case shall the Governments right to inspect supplies under the inspection provisions of this contract be prejudiced. Shipments of such supplies will not be made under this contract until use of the Certificate of Conformance has been authorized in writing by the CAO, or inspection and acceptance have occurred. (b) The Contractors signed certificate shall be attached to or included on the top copy of the inspection or receiving report distributed to the payment office or attached to the CAO copy when contract administration is performed by the Contracting Officer or his/her designee. In addition, a copy of the signed certificate shall also be attached to or entered on copies of the inspection or receiving report accompanying the shipment. (c) The Government has the right to reject defective supplies or services within a reasonable time after delivery by written notification to the Contractor. The Contractor shall in such event promptly replace, correct, or repair the rejected supplies or services at the Contractors expense. (d) The certificate shall read as follows: I certify that on ______ [insert date], the ____ [insert Contractors name] furnished the supplies or services called for by Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this or on the attached acceptance document. Date of Execution: ________________________________ Signature: _______________________________________ Title: ____________________________________________ SECTION F - DELIVERIES OR PERFORMANCE F.1 FPI 1000F1 DELIVERY ORDER Supplement: LCL APPR UNICOR issues delivery orders via email or fax, we will not mail delivery orders unless we are prohibited from using the electronic means listed. UNICOR does not mail delivery orders. Order confirmation shall be signed and dated in blocks 30a, b and c of the delivery order and confirmation must be made within 24 hours of order receipt. Order confirmation containing the following information must be faxed to James Mitchell, Contract Specialist at 352-330-8149 or emailed [email protected] or his/her designee. a. Date of order b. Contract number and order number c. Item number and description, quantity, and unit price d. Delivery or performance date e. Place of delivery f. Shipping instructions g. Accounting data h. Any other pertinent information Delivery shall be 7 business days for each delivery order placed thereafter. The period of performance for this contract will be One (1) base year with four (4) one year option years if exercised. F.2 FPI 1000F2 TIME OF DELIVERY/DELIVERY SCHEDULE Supplement: LCL APPR 16.505(a) and the clause located in FAR 52.216-18 entitled "Ordering" and included in Section I, of this contract, any supplies and/or services to be furnished under this contract shall be ordered by issuance of delivery orders by individuals listed below: PRIMARY: James Mitchell, Contract Specialist, UNICOR FCI Schuylkill, 570-544-7335, Fax 352-330-8149, EMAIL [email protected]. SECONDARY: Lisa Clark, Contract Specialist, UNICOR FCC, Coleman, FL, 352-689-4071 FAX 352-689-8125 F.3 52.211-11 Liquidated Damages - Supplies, Services, or Research and Development. (SEP 2000) If the Contractor fails to deliver the supplies or perform the services within the time specified in this contract, the Contractor shall, in place of actual damages, pay to the Government liquidated damages not to exceed 5% per week of the total cost of each line item delayed. UNICOR will issue purchase orders with pricing according to the assigned contract terms. If contractor fails to deliver product in a timely manner, the contracting officer will issue weekly past due reports to contractor with consideration (liquidated damages) amounts. Liquidated damages will begin to accrue at the moment of a delay caused by the offeror. The amounts will be tracked weekly and UNICOR will bill contractor quarterly for all liquidated damages for the previous three months. If the offeror cannot deliver in a timely fashion UNICOR may require consignment of product. The contractor will issue UNICOR a credit according to the spreadsheet generated by UNICOR Contract Specialist. A copy of the credit shall be submitted to the contract Specialist James Mitchell at [email protected]. If the credit is not received within 30 days, UNICOR contract specialist will notify accounts payable to deduct the overdue amounts from future vendor invoices. Liquidated damages start accruing on the first day an order is late until receipt of that item at the UNICOR location. There is no limit to liquidated damages but the government is open to discussions to assist offeror in mitigating damages. It is the offerors responsibility to notify the government of any delays in shipping the product. It is also the offerors responsibility to find alternate methods to make on-time deliveries in the event of an unforeseen delay such as truck strike. Severe weather delays will be handled on a case by case basis. F.4 52.211-16 Variation in Quantity. (APR 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below. (b) The permissible variation shall be limited to: -0% /+0% SECTION G - CONTRACT ADMINISTRATION DATA (a) Melissa Beasley, Production Controller, FCC Coleman 352-689-4073 [email protected] (b) The COTR is responsible, as applicable, for: receiving all deliverable's, inspecting and accepting the supplies or services provided hereunder in accordance with the terms and conditions of this contract; providing direction to the contractor which clarifies the contract effort, fills in details or otherwise serves to accomplish the contractual Scope of Work; evaluating performance; and certifying all invoices/vouchers for acceptance of the supplies or services furnished for payments. (c) The COTR does not have the authority to alter the contractor's obligations under the contract, and/or modify any of the expressed terms, conditions, specifications, or cost of the agreement. If as a result of technical discussions, it is desirable to alter/change contractual obligations or the Scope of Work, the Contracting Officer shall issue such changes in writing. ADMINISTERED BY: This contract will be administered by: PRIMARY: UNICOR, Federal Prison Industries PO Box 727 Minersville, PA 17954-0727 Attn: James Mitchell, Contract Specialist 570-544-7335 SECONDARY: Lisa Clark, UNICOR FCC Coleman 846 NE 54 th Terrace Coleman, FL 33521 352-689-4071 Written communications shall make reference to the contract number and shall be mailed to the address of the primary contracting officer above. In the event Mr. Mitchell is unavailable, please mail correspondence to the secondary contact. ADDRESS TO WHICH REMITTANCE SHOULD BE MAILED: Offeror shall indicate below the complete mailing address (including the nine digit ZIP code) to which remittance should be mailed if such address is other than that shown in Block 15A, Page 1 (Standard Form 33), they shall enter it below: (a) Payee Name (Contractor):__________________________________ (b) Check Remittance Address: ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ Any questions or problems regarding payment should be directed to the Business Manager at the following locations: UNICOR FPI, CENTRAL ACCOUNTS PAYABLE, PO BOX 4000, BUTNER, NC, 27509-4000 ALL INVOICES SHALL REFERENCE PURCHASE ORDER NUMBER, NOT THE CONTRACT NUMBER. INVOICES RECEIVED WITHOUT THE PURCHASE ORDER NUMBER WILL BE REJECTED AND RETURNED TO VENDOR. NOTE TO VENDORS: IN ACCORDANCE WITH THE PROMPT PAYMENT ACT, INVOICES THAT DO NOT AGREE WITH THE PURCHASE ORDER/DELIVERY ORDER AMOUNTS WILL BE RETURNED TO THE VENDOR AT THE ADDRESS LOCATED IN BLOCK 17A OF THE SF1449. Vendor Payment Offerors must submit a new ACH form whenever any payment information is changed (i.e. new bank, account , routing ). Failure to submit new information will result in delayed or non payment of product/service until information is properly updated. Offerors may obtain the ACH form by logging on to the following website: www.fpi.gov Homepage Procurement branch UNICOR Forms The ACH is the first form, just click on form and print to your printer, fill out and return to the contracting officer. SECTION H - Warranty Left Blank Intentionally SECTION I - CONTRACT CLAUSES I.1 FAR 52.212-4 (May 2001) (DEVIATION) - Contract Terms and Conditions - Commercial Items. Part (d) of clause 52.212-4 is replaced with the following: "This contract is not subject to the Contract Disputes Act of 1978, as amended (41 U.S.C. 601 613). Disputes arising under or relating to this contract shall be resolved in accordance with clause FAR 52.233 1 Disputes (JUL 2002) (DEVIATION), which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. To view the full text clause FAR 52.233 1 Disputes (JUL 2002)(DEVIATION), go to http://www.unicor.gov/fpi_contracting." I.2 52.216-22 (Oct 1995) - Indefinite Delivery Indefinite Quantity Indefinite Quantity (Oct 1995) (a) This is an indefinite-quantity contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies and services specified in the Schedule are estimates only and are not purchased by this contract. (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. The Contractor shall furnish to the Government, when and if ordered, the supplies or services specified in the Schedule up to and including the quantity designated in the Schedule as the maximum. The Government shall order at least the quantity of supplies or services designated in the Schedule as the minimum. (c) Except for any limitations on quantities in the Order Limitations clause or in the Schedule, there is no limit on the number of orders that may be issued. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (d) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractors and Governments rights and obligations with respect to that order to the same extent as if the order were completed during the contracts effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after 14 days beyond contract expiration. I.3 52.223-11 Ozone-Depleting Substances. (MAR 2001) (a) Definition. "Ozone-depleting substance," as used in this clause, means any substance the Environmental Protection Agency designates in 40 CFR part 82 as-- (1) Class I, including, but not limited to, chlorofluorocarbons, halons, carbon tetrachloride, and methyl chloroform; or (2) Class II, including, but not limited to, hydrochlorofluorocarbons. (b) The Contractor shall label products which contain or are manufactured with ozone-depleting substances in the manner and to the extent required by 42 U.S.C. 7671j (b), (c), and (d) and 40 CFR Part 82, Subpart E, as follows: Warning Contains (or manufactured with, if applicable) [[ ]], a substance(s) which harm(s) public health and environment by destroying ozone in the upper atmosphere. [ ] The Contractor shall insert the name of the substance(s). I.4 52.216-18 Ordering (Oct 1995) (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from date of award through one (1) base year with Four (4) One Year options Years if exercised. (b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) If mailed, a delivery order or task order is considered issued when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule. However UNICOR does not mail delivery orders. They are sent to offeror either by fax or email. An order confirmation is the signed copy of the delivery/purchase order. I.5 52-212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders#Commercial Items. Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items (Jul 2010) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [ Contracting Officer check as appropriate.] _X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). __ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jul 2010) (Pub. L. 109-282) (31 U.S.C. 6101 note). __ (5) 52.204-11, American Recovery and Reinvestment Act#Reporting Requirements (Jul 2010) (Pub. L. 111-5). __ (6) 52.219-3, Notice of Total HUBZone Set-Aside (Jan 1999) (15 U.S.C. 657a). __ (7) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (July 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (8) [Reserved] __ (9)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-6. __ (iii) Alternate II (Mar 2004) of 52.219-6. __ (10)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. _X (11) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)). __(12)(i) 52.219-9, Small Business Subcontracting Plan (Jul 2010) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. __ (iv) Alternate III (Jul 2010) of 52.219-9. __ (13) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)). _X (14) 52.219-16, Liquidated Damages#Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (15)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I (June 2003) of 52.219-23. __ (16) 52.219-25, Small Disadvantaged Business Participation Program#Disadvantaged Status and Reporting (Apr 2008) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (17) 52.219-26, Small Disadvantaged Business Participation Program# Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (18) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f). X_ (19) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)). X (20) 52.222-3, Convict Labor (June 2003) (E.O. 11755). X (21) 52.222-19, Child Labor#Cooperation with Authorities and Remedies (Jul 2010) (E.O. 13126). X (22) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). X (23) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). X (24) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). X (25) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793). X (26) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). __ (27) 52.222-54, Employment Eligibility Verification (Jan 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) X (28)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA#Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (29) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b). __ (30)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (Dec 2007) (E.O. 13423). __ (ii) Alternate I (Dec 2007) of 52.223-16. __ (31) 52.225-1, Buy American Act#Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (32)(i) 52.225-3, Buy American Act#Free Trade Agreements#Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138). __ (ii) Alternate I (Jan 2004) of 52.225-3. __ (iii) Alternate II (Jan 2004) of 52.225-3. X (33) 52.225-5, Trade Agreements (Aug 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). __ (34) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.#s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (35) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (36) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (37) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __ (38) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). X (39) 52.232-33, Payment by Electronic Funds Transfer#Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). __ (40) 52.232-34, Payment by Electronic Funds Transfer#Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). __ (41) 52.232-36, Payment by Third Party (Feb 2010) (31 U.S.C. 3332). __ (42) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). _X (43)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [ Contracting Officer check as appropriate.] _X_ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). _X_ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). _X_ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act#Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act#Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment#Requirements (Nov 2007) (41 351, et seq.). __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services#Requirements (Feb 2009) (41 U.S.C. 351, et seq.). __ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). __ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records#Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor#s directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause# (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793). (vii) [Reserved] (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (Jan 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. Alternate I (Feb 2000). As prescribed in 12.301(b)(4)(i), delete paragraph (d) from the basic clause, redesignate paragraph (e) as paragraph (d), and revise the reference to #paragraphs (a), (b), (c), or (d) of this clause# in the redesignated paragraph (d) to read #paragraphs (a), (b), and (c) of this clause.# Alternate II (Apr 2010). As prescribed in 12.301(b)(4)(ii), substitute the following paragraphs (d)(1) and (e)(1) for paragraphs (d)(1) and (e)(1) of the basic clause as follows: (d)(1) The Comptroller General of the United States, an appropriate Inspector General appointed under section 3 or 8G of the Inspector General Act of 1978 (5 U.S.C. App.), or an authorized representative of either of the foregoing officials shall have access to and right to# (i) Examine any of the Contractor#s or any subcontractors# records that pertain to, and involve transactions relating to, this contract; and (ii) Interview any officer or employee regarding such transactions. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), and (c), of this clause, the Contractor is not required to flow down any FAR clause in a subcontract for commercial items, other than# (i) Paragraph (d) of this clause. This paragraph flows down to all subcontracts, except the authority of the Inspector General under paragraph (d)(1)(ii) does not flow down; and (ii) Those clauses listed in this paragraph (e)(1). Unless otherwise indicated below, the extent of the flow down shall be as required by the clause# (A) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (B) 52.203-15, Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (C) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (D) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (E) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). (F) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793). (G) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (H) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). (I) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment#Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (J) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services#Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (K) 52.222-54, Employment Eligibility Verification (Jan 2009). (L) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (M) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. I.6 52.202-1 52.202-1 Definitions (July 2004) I.7 52.203-7 52.203-7 Anti-Kickback Procedures (Oct 2010) I.8 52.216-19 Order Limitations (Oct 1995) (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than $100.00, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order. The Contractor is not obligated to honor (1) Any order for a single item in excess of $3,000.00 (2) Any order for a combination of items in excess of $5,000.00 (3) A series of orders from the same ordering office within 2 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section. (c) If this is a requirements contract includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section. (d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within _2_ days after issuance, with written notice stating the Contractor#s intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. I.9 52.204-4 Printed or Copied Double-Sided on Recycled Paper. (AUG 2000) I.10 52.223-13 Certification of Toxic Chemical Release Reporting (AUG 2003) (a) Executive Order 13148, of April 21, 2000, Greening the Government through Leadership in Environmental Management, requires submission of this certification as a prerequisite for contract award. (b) By signing this offer, the offeror certifies that- (1) As the owner or operator of facilities that will be used in the performance of this contract that are subject to the filing and reporting requirements described in section 313 of the Emergency Planning and Community Right-to-Know Act of 1986 (EPCRA) (42 U.S.C. 11023) and section 6607 of the Pollution Prevention Act of 1990 (PPA) (42 U.S.C. 13106), the offeror will file and continue to file for such facilities for the life of the contract the Toxic Chemical Release Inventory Form (Form R) as described in sections 313(a) and (g) of EPCRA and section 6607 of PPA; or (2) None of its owned or operated facilities to be used in the performance of this contract is subject to the Form R filing and reporting requirements because each such facility is exempt for at least one of the following reasons: [Check each block that is applicable.] [ ] (i) The facility does not manufacture, process, or otherwise use any toxic chemicals listed in 40 CFR 372.65; [ ] (ii) The facility does not have 10 or more full-time employees as specified in section 313(b)(1)(A) of EPCRA, 42 U.S.C. 11023(b)(1)(A); [ ] (iii) The facility does not meet the reporting thresholds of toxic chemicals established under section 313(f) of EPCRA, 42 U.S.C. 11023(f) (including the alternate thresholds at 40 CFR 372.27, provided an appropriate certification form has been filed with EPA); [ ] (iv) The facility does not fall within the following Standard Industrial Classification (SIC) codes or their corresponding North American Industry Classification System sectors: (A) Major group code 10 (except 1011, 1081, and 1094. (B) Major group code 12 (except 1241). (C) Major group codes 20 through 39. (D) Industry code 4911, 4931, or 4939 (limited to facilities that combust coal and/or oil for the purpose of generating power for distribution in commerce). (E) Industry code 4953 (limited to facilities regulated under the Resource Conservation and Recovery Act, Subtitle C (42 U.S.C. 6921, et seq.), or 5169, or 5171, or 7389 (limited to facilities primarily engaged in solvent recovery services on a contract or fee basis); or [ ] (v) The facility is not located in the United States or its outlying areas. I.11 52.223-14 Toxic Chemical Release Reporting (AUG 2003) I.12 52.225-13 Restrictions on Certain Foreign Purchases.(JUNE 2008) I.13 52.225-18 Place of Manufacture (SEPT 2006) (a) Definitions. As used in this clause- " Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. (b) For statistical purposes only, the offeror shall whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly- (1) o In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) Outside the United States. I.14 52.233-4 Applicable Law For Breach Of Contract Claim (OCT 2004) I. 15 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) I. 16 52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://www.arnet.gov/far/loadmainre.html. I.17 52.252-2 Clauses Incorporated by Reference. This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): http://www.arnet.gov/far/loadmainre.html. I. 18 52.215-8 Order of Precedence - Uniform Contract Format (OCT 1997) I.19 52.233-3, Protest after Award (31 U.S.C. 3553). (AUG 1996) (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or components: I.20 52.217-6 Option for Increased Quantity (AUG 1996) I.21 52.242-13 Bankruptcy (MAR 1989) I. 22 52.227-3 Patent Indemnity (Apr 1984) (a) The Contractor shall indemnify the Government and its officers, agents, and employees against liability, including costs, for infringement of any United States patent (except a patent issued upon an application that is now or may hereafter be withheld from issue pursuant to a Secrecy Order under 35 U.S.C. 181) arising out of the manufacture or delivery of supplies, the performance of services, or the construction, alteration, modification, or repair of real property (hereinafter referred to as #construction work#) under this contract, or out of the use or disposal by or for the account of the Government of such supplies or construction work. (b) This indemnity shall not apply unless the Contractor shall have been informed as soon as practicable by the Government of the suit or action alleging such infringement and shall have been given such opportunity as is afforded by applicable laws, rules, or regulations to participate in its defense. Further, this indemnity shall not apply to# (1) An infringement resulting from compliance with specific written instructions of the Contracting Officer directing a change in the supplies to be delivered or in the materials or equipment to be used, or directing a manner of performance of the contract not normally used by the Contractor; (2) An infringement resulting from addition to or change in supplies or components furnished or construction work performed that was made subsequent to delivery or performance; or (3) A claimed infringement that is unreasonably settled without the consent of the Contractor, unless required by final decree of a court of competent jurisdiction. SECTION - J: Novation Agreements and Name Changes IT IS THE CONTRACTORS RESPONSIBILITY TO NOTIFY THE CONTRACTING OFFICER IN WRITING OF ANY CHANGES TO THE COMPANIES STATUS, SUCH AS BUT NOT LIMITED TO: NAME CHANGE OR SELL OF ASSETS. THE CONTRACTOR MUST DO SO IN ACCORDANCE WITH FAR 42.1204 APPLICABILITY OF NOVATION AGREEMENTS AND 42.1205 AGREEMENT TO RECOGNIZE CONTRACTOR'S CHANGE OF NAME. THIS MUST BE DONE AS SOON AS THE CONTRACTOR IS AWARE OF ANY CHANGES. FAILURE TO NOTIFY THE CONTRACTING OFFICER OF THESE CHANGES WILL RESULT IN DELAY IN PAYMENT. THE CONTRACTOR IS RESPONSIBLE FOR ALL DELIVERIES UNTIL PAPERWORK HAS BEEN SUBMITTED AND APPROVED BY THE GOVERNMENT. SECTION - K: REPRESENTATIONS, CERTIFICATIONS, AND OTHER STATEMENTS OF OFFERORS OR QUOTERS 52.212-3 Offeror Representations and Certifications-Commercial Items. An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision. (a) Definitions. As used in this provision: Emerging small business means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated. Forced or indentured child labor means all work or service (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Inverted domestic corporation means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Service-disabled veteran-owned small business concern (1) Means a small business concern (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). Small business concern means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. Veteran-owned small business concern means a small business concern (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. Women-owned small business concern means a small business concern (1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and CertificationsCommercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ______________. [Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it o is, o is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it o is, o is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it o is, o is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it o is, o is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is, o is not a women-owned small business concern. Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it o is a women-owned business concern. (7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________________________________ (8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. [Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.] (i) [Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).] The offeror represents as part of its offer that it o is, o is not an emerging small business. (ii) [Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).] Offeror represents as follows: (A) Offerors number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or (B) Offerors average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts). (Check one of the following): Number of Employees Average Annual Gross Revenues __ 50 or fewer __ $1 million or less __ 51100 __ $1,000,001$2 million __ 101250 __ $2,000,001$3.5 million __ 251500 __ $3,500,001$5 million __ 501750 __ $5,000,001$10 million __ 7511,000 __ $10,000,001$17 million __ Over 1,000 __ Over $17 million (9) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation ProgramDisadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either (A) It o is, o is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It o has, o has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) o Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that (i) It o is, o is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR Part 126; and (ii) It o is, o is not a joint venture that complies with the requirements of 13 CFR Part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the HUBZone small business concern or concerns that are participating in the joint venture: __________.] Each HUBZone small business concern participating in the joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 (1) Previous contracts and compliance. The offeror represents that (i) It o has, o has not participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It o has, o has not filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that (i) It o has developed and has on file, o has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 cfr parts 60-1 and 60-2), or (ii) It o has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352) (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American ActSupplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of domestic end product. The terms commercially available off-the-shelf (COTS) item component, domestic end product, end product, foreign end product, and United States are defined in the clause of this solicitation entitled Buy American ActSupplies. (2) Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American ActFree Trade AgreementsIsraeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American ActFree Trade AgreementsIsraeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms Bahrainian, Moroccan, Omani, or Peruvian end product, commercially available off-the-shelf (COTS) item, component, domestic end product, end product, foreign end product, Free Trade Agreement country, Free Trade Agreement country end product, Israeli end product, and United States are defined in the clause of this solicitation entitled Buy American ActFree Trade AgreementsIsraeli Trade Act. (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled Buy American ActFree Trade AgreementsIsraeli Trade Act: Free Trade Agreement Country End Products (Other than Bahrainian, Moroccan, Omani, or Peruvian End Products) or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled Buy American ActFree Trade AgreementsIsraeli Trade Act. The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of domestic end product. Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American ActFree Trade AgreementsIsraeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled Buy American ActFree Trade AgreementsIsraeli Trade Act: Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American ActFree Trade AgreementsIsraeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled Buy American ActFree Trade AgreementsIsraeli Trade Act: Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled Trade Agreements. (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals (1) o Are, o are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) o Have, o have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; (3) o Are, o are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) o Have, o have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed end products. Listed End Product Listed Countries of Origin ___________________ ___________________ ___________________ ___________________ (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [ ] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [ ] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that it has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly (1) o In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) o Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] [ ] (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror o does o does not certify that (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. [ ] (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror o does o does not certify that (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offerors relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offerors TIN. (3) Taxpayer Identification Number (TIN). o TIN: ________________________________. o TIN has been applied for. o TIN is not required because: o Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; o Offeror is an agency or instrumentality of a foreign government; o Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. o Sole proprietorship; o Partnership; o Corporate entity (not tax-exempt); o Corporate entity (tax-exempt); o Government entity (Federal, State, or local); o Foreign government; o International organization per 26 CFR 1.6049-4; o Other ________________________________. (5) Common parent. o Offeror is not owned or controlled by a common parent; o Name and TIN of common parent: Name ________________________________. TIN _________________________________. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Relation to Internal Revenue Code. A foreign entity that is treated as an inverted domestic corporation for purposes of the Internal Revenue Code at 26 U.S.C. 7874 (or would be except that the inversion transactions were completed on or before March 4, 2003), is also an inverted domestic corporation for purposes of 6 U.S.C. 395 and for this solicitation provision (see FAR 9.108). (2) Representation. By submission of its offer, the offeror represents that it is not an inverted domestic corporation and is not a subsidiary of one. (End of provision) Alternate I (Apr 2002). As prescribed in 12.301(b)(2), add the following paragraph (c)(11) to the basic provision: (11) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(4) or (c)(9) of this provision.) [The offeror shall check the category in which its ownership falls]: ____ Black American. ____ Hispanic American. ____ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians). ____ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, U.S. Trust Territory of the Pacific Islands (Republic of Palau), Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru). ____ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal). ____ Individual/concern, other than one of the preceding. Alternate II (Oct 2000). As prescribed in 12.301(b)(2), add the following paragraph (c)(9)(iii) to the basic provision: (iii) Address. The offeror represents that its address o is, o is not in a region for which a small disadvantaged business procurement mechanism is authorized and its address has not changed since its certification as a small disadvantaged business concern or submission of its application for certification. The list of authorized small disadvantaged business procurement mechanisms and regions is posted at http://www.arnet.gov/References/sdbadjustments.htm. The offeror shall use the list in effect on the date of this solicitation. Address, as used in this provision, means the address of the offeror as listed on the Small Business Administrations register of small disadvantaged business concerns or the address on the completed application that the concern has submitted to the Small Business Administration or a Private Certifier in accordance with 13 CFR Part 124, subpart B. For joint ventures, address refers to the address of the small disadvantaged business concern that is participating in the joint venture. SECTION L - INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS OR QUOTERS L.1 52.212-1 Instructions to Offerors--Commercial Items. (JUNE 2008) L.2 52.215-5 Facsimile Proposals. (OCT 1997) (a) Definition. "Facsimile proposal," as used in this provision, means a proposal, revision or modification of a proposal, or withdrawal of a proposal that is transmitted to and received by the Government via facsimile machine. (b) Offerors may submit facsimile proposals as responses to this solicitation. Facsimile proposals are subject to the same rules as paper proposals. (c) The telephone number for receiving facsimile equipment is: 352-330-8149 (d) If any portion of a facsimile proposal received by the Contracting Officer is unreadable to the degree that conformance to the essential requirements of the solicitation cannot be ascertained from the document - (1) The Contracting Officer immediately shall notify the offeror and permit the offeror to resubmit the proposal; (2) The method and time for resubmission shall be prescribed by the Contracting Officer after consultation with the offeror; and (3) The resubmission shall be considered as if it were received at the date and time of the original unreadable submission for the purpose of determining timeliness, provided the offeror complies with the time and format requirements for resubmission prescribed by the Contracting Officer. (e) The Government reserves the right to make award solely on the facsimile proposal. However, if requested to do so by the Contracting Officer, the apparently successful offeror promptly shall submit the complete original signed proposal. L.3 FPI 999.999-9 BUSINESS MANAGEMENT QUESTIONNAIRE Supplement: LCL APPR INSTRUCTIONS: Offerors will identify previous federal, state, local government and private contracts, which they are currently performing on or have performed on and that are similar in scope to the requirement being evaluated. Offerors shall list three (3) contracts for evaluation. References provided shall be for contracts performed within the past three (3) years, and should be similar in size and scope to items listed on this solicitation. List one reference per form. (Form may be duplicated) NOTE: If you performed any similar contracts for UNICOR, list them first. Reference 1: Name, Address, Telephone number, email address and point of contact. Contract Number: Type of Contract: Contract Dollar Value: Description of supply or service provided: Reference 2: Name, Address, Telephone number, email address and point of contact. Contract Number: Type of Contract: Contract Dollar Value: Description of supply or service provided: Reference 3: Name, Address, Telephone number, email address and point of contact. Contract Number: Type of Contract: Contract Dollar Value: Description of supply or service provided: L.4 RESPONSIBLE PROSPECTIVE CONTRACTORS Supplement: LCL APPR Per FAR subpart 9.1, the following data is required from prospective contractors to determine financial responsibility. Name of Bank/Financial Institution: Address: Telephone Number: Point of Contact: L.5 52.204-6 Data Universal Numbering System (DUNS) Number. (APR 2008). L.6 INSTRUCTIONS TO OFFERORS/PROPOSAL REQUIREMENTS Offerors will be evaluated on their proposals, including each of the following parts: 1. Past Performance Information 2 Price; PART I: PAST PERFORMANCE INFORMATION Past Performance - Offeror's will be evaluated on their record of relevant, and recent past performance, from the Business Questionnaires submitted, and information received from past contracts and any additional data obtained by the Government, i.e., current contracts. Relevant past performance is defined as having a record of actual performance or accomplishment in the manufacturing of wood edgebanding/edgetape on contracts similar in scope to the requirement being evaluated. Recent past performance information is defined as contracts performed within the last three years. In evaluating offerors past performance, the Contracting Officer will consider the following: adherence to contract schedules, cooperative behavior and commitment to customer satisfaction, and the timeliness of performance taking into account excusable delays. Offerors may provide information on problems encountered on the identified contracts and the corrective action taken. The Government shall consider this information, as well as information obtained from any other sources, when evaluating the offerors past performance. Prompt corrective action in isolated instances may not outweigh overall negative trends. In the case of an offeror without a record of relevant past performance or for whom information on past performance is not available, the offeror may not be evaluated favorably or unfavorably on past performance. PART II: PRICE PROPOSAL All offerors are required to submit a comprehensive list of prices for sharpening offered in Schedule B. Offerors are to provide this pricing for the base year, and each option year. L.7 52.222-24 Preaward On-Site Equal Opportunity Compliance Evaluation. L.8 52.216-27 Single or Multiple Awards (Oct 1995) UNICOR INTENDS TO MAKE A SINGLE AWARD AS A RESULT OF THIS SOLICITAITON. L.9 52.233-2 Service of Protest. Service of Protest (Sept 2006) (a) Protests, as defined in section 31.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from Tatea R. Cavanaugh, Contracting Officer, 320 First Street NW, 7th Floor, Washington, DC 20534. [ (b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO. SECTION M - EVALUATION FACTORS FOR AWARD M.1 52.212-2 Evaluation Commercial Items. Evaluation Commercial Items (Jan 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. Adjectival ratings shall be used to evaluate offerors proposals. The following evaluation factors will be evaluated utilizing the adjectival ratings listed below: Past Performance Information; Price. Poor Unfavorable Marginal More unfavorable than favorable Good More favorable than unfavorable Excellent Entirely favorable Offeror's past performance will first be evaluated for relevancy and recentness. Only relevant, recent past performance contracts will then be evaluated for the offerors performance and given an adjectival rating as listed above. The offeror will then be given an overall confidence assessment rating, using the adjectival ratings listed above. The price proposal will be evaluated through price competition of this acquisition and as compared to the Government Estimate. Price will be evaluated for fairness and reasonableness. d) Options. The Government will evaluate offerors for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). e) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer shall result in a binding contract without further action by either party. Before the offers specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. M.2 The Contracting Officer will make award to the offeror whose proposal represents the best overall expected value and that is considered most advantageous to its interests based on the criteria specified in this solicitation. M.3 Offerors are advised that the Government intends to evaluate proposals and award without discussions. Therefore, the initial proposal should contain the offerors best terms from a cost or price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. M.4 Tradeoff Process: It may be in the governments best interest to consider award to other than the lowest priced offeror or other than the highest technical rated offeror. This process may include tradeoffs among cost/price and non cost factors and allows the Government to accept other than the lowest prices proposal if the perceived benefits of the higher priced proposal are determined to merit the additional cost.