Paper Napkin Dispenser

DISPENSER, PAPER NAPKIN: Shall have the following characteristics: Material - Stainless steel Capacity - 125 - 150 folded napkins (3-1/2" x 7") minimum. The body of the paper napkin dispenser shall be constructed from 400 series corrosion-resisting steel and shall be 28 gauge or better. The dispenser shall have two openings for dispensing napkins, 180 degrees apart. The dispenser shall hold a minimum of 125 folded paper napkins measuring 7 inches in length by 3-1/2 inches in width. The dispenser shall be capable of holding an equal number of napkins on both sides. The dispenser shall be provided with four non-marking rubber feet securely fastened to the base of the dispenser. The interior of the dispenser shall have two pressure plates, one for each side, which maintain pressure against the napkins for ease of dispensing and shall be 31 gauge or better. The pressure plates shall be made from corrosion-resisting steel or zinc plated carbon steel and shall have a corrosion-resistance finish. The outer surfaces of the dispenser shall have a smooth and polished finish. The dispenser shall properly dispense single napkins without tearing.