99--FAA TELECOMMUNICATION INFRASTRUCTURE (FTI) SITE PREP, ARTCC, OLATHE, KANSAS

THIS PROJECT IS TO PERFORM THE SITE PREP FOR THE FAA TELECOMMUNICATION INFRASTRUCTURE (FTI) AT THE AIR ROUTE TRAFFIC CONTROL CENTER IN OLATHE, KANSAS. THE WORK INCLUDES BUT IS NOT LIMITED TO THE FOLLOWING: 1) REMOVE AND DISPOSE OF THE EXISTING RAISED FLOOR. 2) INSTALL THE TATE CONCORE 1250 AND THE TATE LAMINATED RAISED FLOOR SYSTEMS (GFM). 3) REMOVE AND DISPOSE OF THE EXISTING SOUND ACOUSTICAL PANELS (SAP) AS ASBESTOS CONTAINING MATERIAL (ACM). 4) FURNISH AND INSTALL NEW SAP PANELS. 5) REMOVE AND DISPOSE OF THE COMPUTER ROOM AIR HANDELING UNITS IN THE AUTOMATION WING BASEMENT. 6) REMOVE AND DISPOSE OF THE EXISTING HALON FIRE SUPPRESSION AND CONTROL SYSTEM IN THE AUTOMATION WING BASEMENT, 7) REMOVE AND DISPOSE OF THE EXISTING FIRE ALARM SYSTEM IN THE AUTOMATION WING BASEMENT. 8) PROVIDE INLETS FOR THE CENTRAL VACUUM LINE PIPING THROUGH THE NEW TATE RAISED FLOOR PANELS. 9) FURNISH AND INSTALL SIX NEW COMPUTER ROOM AIR-HANDLING UNITS. 10) FURNISH AND INSTALL A NEW ON/OFF! PREACTION SPRINKLER FIRE PROTECTION SYSTEM. 11) FURNISH AND INSTALL A NEW FIRE DETECTION SYSTEM. 12) REMOVE AND DISPOSE OF 11 EXISTING ELECTRICAL PANELS, FEEDERS, AND BREAKERS. 13) FURNISH AND INSTALL 11 NEW POWER PANELS, FEEDERS, AND BREAKERS. 14) FURNISH AND INSTALL A SIGNAL REFERENCE GRID AND COPPER PERIMETER GROUND THAT WILL BE INSTALLED AND CONNECTED TO MAIN GROUNDING PLATE. COST RANGE:$500,000.00 TO $1,000,000.00