THIS SOURCES SOUGHT IS FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION. All interested parties, please provide an email to
[email protected] with interest in providing the supplies as listed below: Borescope with Blade Turning Tool Kit. List of items required for kit: Motor, Drive-Core Engine Rotation (CFM56-2) Borescope, Videoprobe – Flexible Borescope Resolution Monitor 35mm camera Video Monitor Borescope set, is stored in a carrying case (a) Optical system specifications. Distal focusing - adjustment at eyepiece. Depth of field - 6 mm to 100 mm. Angle of view - 90 degrees. Diopter adjustment - minus 6D to plus 4D. Magnification - 1:1 at 25 mm. Objective focal distance - 2.13 mm. Lens speed - f 2.8. Image bundle size - 1.7 mm square. Single fiber image guide - 17 microns. Illumination - inherent light guide with 5 feet extension. (b) Distal tip specifications. Size - 6 mm dia x 20 mm long. Side view - 90 degrees to centerline of probe. (c) Bending section (articulated tip) specifications. 1Angulation controllable at eyepiece 180° (90° up - 90° down). Minimum bend radius - one in. (25,4 mm). Length of bending section - 50 mm. (d) Flexible cable-probe specifications. Working length - 70 in. (1800 mm). Outside diameter over working length - 6 mm. Covering on cable - stainless steel braid. Temperature range - 0°F to 200°F (- 18°C to 93°C) continuous operation Borescope guide tube kit for HP turbine and HPT shroud