MILLING MACHINE / SURFACE GRINDER

This is a combined synopsis/solicitation for commercial items/services prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Solicitation number H92257-10-Q-0021 is issued as a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005–43 and DFARS Change Notice DCN 20100628. The proposed acquisition is restricted to total small businesses. The associated NAICS code is 333512 with a standard business size of 500 Employees. A Firm Fixed Price (FFP) contract is contemplated. Marine Corps Special Operations Command, Camp Lejeune North Carolina, has a one-time requirement to procure: CLIN 0001: Bridgeport Series 1 Milling machine with 2J Vari-drive head. Qty: 1 U/I: EA Features: - 48”x 9” Table Size - 2HP, 3HP – 30minute motor, completely balanced, nickel plated motor shaft, no lubrication required - Quill power feed is standard. Quill (3 /38”dia.) is hard chrome-plated, hand lapped for accuracy and long life. R8 spindle with 5” quill travel - Quick release micrometer adjust quill stop - Ground spindle taper and ABC class 7 bearings eliminate run out - Ribbed cast table, precision ground, hand-spotted - Multiple knee and table locks for high rigidty - Anti-friction bearings used throughout - Gibs are full length on saddle and knee - Bridgeport 50 degree angular ways, full bearing contact - Meterd one-shot lube system - Bridgeport patented airflow cooling design uses no external fans - Ball and pinion gear, completely balanced - Ram and turret are precision ground for superior fit, extra rididity. No shims or gibs used. Patented ram and turret locks - Easy-to-read scales on the ram and turret - EZ reading dials on the table and cross slide - All alignment ways and gibs are completely hand scraped to within tenths of a thousandth, ensuring full bearing support. Single gib screw for easier adjustment - Chrome-plated ways and gibs to ensure long life and ideal lubricating surface and lowest possible coefficient of friction - Plated to MIL SPEC QQ-C-320 Class 2-A (exceeds Rockwell C-70) - Dished Column base - CLIN 0002: Collets Set Qty: 1 U/I: SE - Type: R8 - Inside diameter range: 1/8 – 7/8 CLIN 0003: Vectrax Surface Grinder Machine Qty: 1 U/I: EA - Manual Ballway 3500 RPM - 2 HP - Voltage: 220 V 60 HZ CLIN 0004: Electric Chuck Qty: 1 U/I: EA - 6”x 18” CLIN 0005: Surface Grinding Wheel Qty: 10 U/I: EA - Type 1 - 177.8MM, 7” Straight diameter - ½” Width - Grit: 46 - 1 ¼” Hole size - Aluminium oxide - Hardness: I - Density: Porous Delivery: MARSOC, BLDG RR400, Stone Bay, NC 28460, 30 days ARO. The Government anticipates award of a Firm Fixed Price contract. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. For this solicitation, the most advantageous offer for the government will be the responsible, lowest-priced, technically acceptable offeror considering the following factors: 1. Price 2. Delivery 3. Technical 4. Past Performance Proposals will be evaluated in an efficient and minimally burdensome fashion. The offeror must be acceptable in all factors listed to be considered technically acceptable. The Government will then make award to the lowest priced of the technically acceptable vendors. The provisions and clauses can be found at FAR website: http://www.arnet.gov/far and DFARS website: http://www.acq.osd.mil/dpap /dars/dfarspgi/current/index.html. CLAUSES INCORPORATED BY REFERENCE: FAR 52.202-1 Definitions (JUL 2004) FAR 52.204-7 Central Contractor Registration (APR 2008) FAR 52.211-6 Brand Name or Equal (Aug 1999) FAR 52.211-17 Delivery of Excess Quantities (Sep 1989) FAR 52.212-1 Instructions to Offerors Commercial Items (APR 2008) FAR 52.212-4 Contract Terms and Conditions Commercial Items (MAR 2009) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items (JUN2009) FAR 52.222-19 Child Labor—Cooperation with Authorities and Remedies FAR 52.222-3 Convict Labor (JUN 2003) FAR 52.222-21 Prohibition of Segregated Facilities (FEB 1999) FAR 52.222-26 Equal Opportunity (MAR 2007) FAR 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998) FAR 52.222-50 Combating Trafficking in Persons (FEB 2009) FAR 52.225-13 Restrictions on Certain Foreign Purchases (FEB 2006) FAR 52.232-33 Payment by Electronic Funds Transfer Central Contractor Registration (OCT 2003) FAR 52.232-8 Discount for Prompt Payment (Feb 2002) FAR 52.249-8 Default (Fixed-Price Supply & Services) (APR 1984) FAR 252.203-7002 Requirements to Inform Employees of Whistleblower Rights (Jan 2009) FAR 252.232-7010 Levies on Contract Payments (Dec 06) DFARS 252.204-7000 Disclosure of Information (DEC 1991) DFARS 252.204-7004 Central Contractor Registration (SEP 2007) ALT A DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items (NOV 2009) DFARS 252.225-7001 Buy American Act and Balance of Payments Program (JAN 2009) DFARS 252.232-7003 Electronic Submission of Payment Requests (MAR 2007) CLAUSES INCORPORATED BY FULL TEXT: Please note that due to character limitation in FedBizOpps, full text of the Federal Acquisition Regulation (FAR) can be accessed on the Internet at http://www.farsite.hill.af.mil. All FAR representations and certifications shall be submitted through Online Representations and Certifications Application (ORCA) at https://orca.bpn.gov. 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: technical capability, delivery, and price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. FAR 52.212-3 Offeror Representations and Certifications Commercial Items (AUG 2007) Alternate I (APR 2002) FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) FAR 52.253-1 Computer Generated Forms DFARS 252.212-7000 Offeror Representations and Certifications Commercial Items (JUN 2005) SOFARS 5652.201-9002 Authorized Changes Only By Contracting Officer (JAN 2005) SOFARS 5652.204-9003 Disclosure of Unclassified Information (NOV 2007) SOFARS 5652.204-9002 Instruction for the Use of Electronic Contracts (NOV 2007) SOFARS 5652.252-9000 Notice of Incorporation of Section K (FEB 2007) The Contractor shall not comply with any order, direction or request of Government personnel unless it is issued in writing and signed by the Contracting Officer, or is pursuant to specific authority otherwise included as part of this contract. Except as specified herein, no order, statement, or conduct of Government personnel who visit the contractor's facilities or in any other manner communicates with Contractor personnel during the performance of this contract shall constitute a change under the Changes clause in Section I. In the event the Contractor effects any change at the direction of any person other the Contracting Officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price to cover any increase in cost incurred as a result thereof. The address and telephone number of the Contracting Officer is SSgt Simpson III, William B. , telephone (910) 440-0700, RR400 Rifle Range Rd., Sneads Ferry, NC 28460. Offerors are required to be registered in the Central Contractor Registration database (CCR). For more information about registering, contact CCR regional Assistance Center 888-227-2423 or visit their website (www.ccr.gov). Offerors must be registered prior to receiving an award for this acquisition or for any future awards. As a condition of receipt of this contract, the Contractor agrees to implement the Department of Defense web-based software application, called Wide Area Workflow Receipt and Acceptance (WAWF-RA). This application allows DoD vendors to submit and track invoices and Receipt/Acceptance documents electronically. This application allows for complete visibility throughout the acceptance and payment process. The web-site for registration is http://rmb.ogden.disa.mil. WAWF training can be accessed at http://www.wawftraining.com/. This combined synopsis/solicitation will not be available electronically on the Navy Electronic Commerce Online (NECO) World Wide Web site (www.neco.navy.mil). All proposals, bids and/or quotes submitted shall be the Contractor's Best Quote as it is the Government's intent to entertain one final quote only; this includes any discounts on volume. Contractors shall submitt all proposals, bids and/or quotes to the MARSOC Contracting Office by no later than August 3 2010 at 4:00 p.m. EST, to be considered for award. Quotes will be accepted via facsimile Attn: Simpson III, William B. , telephone (910) 440-1128, or via email [email protected]. Late submissions will not be considered. The burden of insuring the Contractor’s quotes are received by this office, within the stated timeframe, is the responsibility of Contractor. Questions, please contact SSgt Simpson III, William B. , telephone (910) 440-0700, or via email [email protected]