THIS IS A SOURCES SOUGHT NOTICE: National Security Technologies is seeking sources to manufacture, deliver, and install 3 each prefabricated 32' wide x 30' deep x 19' high, totally enclosed, all-fabric covered buildings. Delivery and installation schedules are discussed below. SUBCONTRACTOR to provide all labor, tools, materials, and equipment necessary to complete the installations. Each prefabricated building to have the following features and specifications: • Exterior cover: Exterior cover to be UV protected, minimum 12.5 oz/yd, white, fabric backed polymaterial. • Interior liner to be minimum 10.0 oz/yd, white, fabric backed polymaterial. • Covering to be waterproof and installed so that no water leaks through the seams nor from between the bottom of the building and the concrete. • Building designed to meet or exceed the requirements of the International Building Code (IBC) 2006. • In particular, the building shall be designed to sustain the following conditions: o Sustained winds up to 76 mph (IBC 1609.3.1) o 3 second wind gust up to 90 mph (IBC 1609.3.1) o Winter temperatures down to 0 degree F o Summer temperatures up to 11 degrees F • Overhead Door: 12' x 12' opening. The overhead door to be opened by a hand with pull chain. The door to be one piece (no split) that will fold up or roll up at the top of the opening as the door is opened. The hardware for the door to be mounted on the outside of the building. The width of the door material to be 14' wide with 1 foot of material extending past the sides of opening on both sides. The sides of the door material to be Velcroed to the face of the building to help seal the door. • 4' x 7' wooden personnel door. • Roof opening: 10' x 20' opening in the top of the building. The opening in the roof to be framed in. • Roof opening cover: Each building to come with a piece of liner material (lid) that will cover the roof opening from the inside. A solid strip of Velcro to be mounted on the inside surface liner around the opening. The edges of the lid to have Velcro as well to help hold the lid up during and after installation. The lid to be manufactured with a little slack so that it doesn't have to be pulled tightly when covering the hole. • The building will be anchored to an existing 33' x 33' concrete slab. • The building to be installed by the vendor so that the warrantees will not be voided. • Each building will stand for a maximum of 2 months prior to being destroyed by explosives. • Price to include delivery of buildings to a location on the Nevada Test Site. Schedule: RFP to be issued on or about 8/4/08 with award to be on or about 09/04/08. Delivery of first prefabricated building to be not later than 8 weeks after award. Delivery of second and third buildings to be not later than 8 weeks after delivery of first building. The anticipated installation start dates for the SUBCONTRACTOR to install the prefabricated buildings are currently scheduled for 11/15/08, 2/1/09, and 5/1/09. These dates are subject to change depending on the testing schedule. To be considered, interested parties are to provide information demonstrating your capability to provide the equipment and installation to Gary Morrison via email
[email protected] with your contact information.