Procure and install work stations

All supervisor cubicles should be floor to ceiling (10 feet) Room 1 Two supervisor workstations to be assembled as follows in a location to be determined upon arrival: 2 - Supervisor workstation (cubicle soft wall) floor area is 8' X 10' for each supervisor work station with walls to extend to the ceiling (10' ceiling) 2 - Full height lockable door packages with locks installed 2 - Modular (cubicle) workstation/work surface. Work surface to be designed to maximize work surface area to include corner work surface where applicable 4 - Overhead storage bins with task lights. Two per supervisor work station 4 - 2 drawer file cabinet. Two per supervisor work station 2 - High back executive chair 4 - Matching side chairs Room 2 The following layout to be accomplished to maximize available space in room 235 which is approximately 48' X 52' One supervisor workstation to be assembled as follows: 1 - Workstation (cubicle soft wall) floor area is 12' X 14' with walls to extend to the ceiling (10' ceiling) 1 - Full height lockable door package with lock installed 1 - Modular (cubicle) workstation/work surface. Work surface to be designed to maximize work surface area to include corner work surface where applicable 2 - Overhead storage bins with task lights 2 - 2 drawer file cabinet 1 - High back executive chair 2 - Matching side chairs One conference room (20' X 28' ) with one door to be assembled as follows: Soft walls to extend to the ceiling (10' ceiling). Conference room will require construction of two walls, one 20' and one 28', which will be attached at 90 degrees, and will then be attached to two existing interior walls in this room Full height entrance/exit door package installed 20 shared soft wall cubicle stations (to accommodate 20 people). Cubicle work stations to be assembled to maximize available space in room. Cubicle work stations to be assembled to standard height or to approximately 66" (6' X 7') cubicle floor space for each person 20 - Modular (cubicle) workstation/work surface. Work surface to be designed to maximize work surface area to include corner work surface where applicable 2 - 2 drawer file cabinet per person 2 - Overhead storage bins for each person 2 - Task lights for each person Room 3 One supervisor work station to be assembled as follows in a location in room to be determined upon arrival: 1 - Supervisor workstation (cubicle soft wall) floor area is 12' X 14'. Walls to extend to the ceiling (10' ceiling) 1 - Full height lockable door package with lock installed 1 - Modular (cubicle) workstation/work surface. Work surface to be designed to maximize work surface area to include corner work surface where applicable 2 - Overhead storage bins with task lights 2 - 2 drawer file cabinet 1 - High back executive chair 2 - Matching side chairs