20 -- Provide labor, equipment and materials to calibrate pressure gages, temperature gages, and electrical meters aboard USNS Mercy.

PROVIDE THE SERVICES OF A QUALIFIED CONTRACTOR TO PERFORM THE FOLLOWING WORK ABOARD USNS MERCY:a) Provide labor, equipment and materials to calibrate pressure gages, temperature gages, and electrical meters aboard USNS Mercy. For estimating purposes assume approximately 1200 separate instruments will require calibration. Specific gages to be calibrated will be determined by MSCREP. b) All gages shall be calibrated to ISO 10012-1 and Navy code 7AI standards. On completion of calibration, MSCREP will spot check 2% of the total gages calibrated for accuracy. c) All gages shall have a calibration sticker attached designating date and initials of person verifying calibration. d) Any gages not meeting the above standards will be turned over to ship?s force and replaced with new CFM gages which meet the above standards. e) Vessel Location: 32nd Street Naval Station, San Diego, California f) The point of contact for this action is Mr. Jim Thilenius, Port Engineer at extension 619-524-9788.