Description
DLA is looking for sources to supply Military and Commercial COTS. DLA Troop Support anticipates the award of an indefinate quantity contract for the manufacuture delivery of COTS, folding, aluminum frame. Which are made I/A/W specifications below. The contract base period will be for a term of two years. This will be a best value buy with tradeoffs. The solicitation will contain an option to extend the terms of the contract for five years. Pricing for the base years will be provided up front by the contractor. The option periods will be linked to the producer price index (PPI). which will be adjusted annually or to an EPA clause. Support of this item will be based on DLA direct deliveries. the material will be shipped to either New Cumberland, PA or Tracy, CA. DLA stock distribution localtions and or customer direct deliveries where the material is delivered to DLA customer throughout the USA. The Military NSN is 7105-00-935-0422 and Commercial NSN is 7105-01-154-3865 COT, FOLDING, COMMERCIAL ALUMINUM FRAME, TUFRON COVER EACH INDIVIDUAL COT MUST BE PACKAGED PER MIL-DTL-117, TYPE I, CLASS B, STYLE 2 NOTE: ALL WOODEN PALLETS MUST BE HEAT TREATED AND HAVE AN INTERNATIONAL STAMP. SALIENT CHARACTERISTICS: BRAND NAME OR EQUAL FABRIC POLYESTER, FRAME ALUMINUM (81337) US ARMY NATICK R & D COMMAND P/N: 2-5-72 NO. OF STITCHES PER INCH-8 TO 10, 1/32 IN. DIA MAX HOLES MAY BE USED TO INDICATE FOLD LOCATION ON COVER, HOLES TO BE FUSION SEALED, RAW EDGES TO BE TURNED UNDER A MIN. OF 1/2" FINISH SHALL BE TYPE III. DRAWING/DOCUMENT EXCEPTIONS: USE SAE-AMS-QQ-A-200/8, OR ASTM-B241/B241M, OR ASTM-B229 I/L/O QQ-A-200/8. USE SAE-AMS-QQ-A-200/9, OR ASTM-B241/B241M, OR ASTM-B229 I/L/O QQ-A-200/9. USE MIL-R-24243/3A604 I/L/O MIL-24243/3A604. USE MIL-PRF-5038J I/L/O MIL-T-5038 SUPERSEDED. USE A-A-208B I/L/O TT-I-1795A CANCELLED. USE MIL-DTL-32075 I/L/O DDD-L-20F CANCELLED. USE MIL-DLT-32072 I/L/O V-T-285F CANCELLED. USE A-A-59708 I/L/O CCC-D-950F CANCELLED. EACH INDIVIDUAL COT MUST BE PACKAGED PER MIL-DTL-117, TYPE I, CLASS B, STYLE 2 DOD REQUIREMENTS FOR WOOD PACKAGING MATERIAL (WPM) REQUIRES WOODEN PALLETS MUST BE HEAT TREATED AND HAVE AN INTERNATIONAL STAMP. IDENTIFY TO: MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY MIL-STD-130N(1) DATED 16 NOV 2012. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING *OPEN SOLICITATION ONLY*. TO RECEIVE A COPY OF THE DRAWING(S), FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/ S OURCE INSPECTION REQUIRED. DETAILED DRAWING DATA LIST QUALITY ASSURANCE DATA SPECIFICATION STANDARD SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.