Volume Graphic Software

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A SEPARATE WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION UNDER FAR PART 13. Background: The Production Systems Group (PSG) of Intelligent Systems Division (ISD) at NIST has the qualification of additive manufacturing project related to dimensional measurement and defect detection of three-dimensional (3D) X-ray Computed Tomography (XCT) datasets of additively manufactured components. The dimensional measurement based on XCT images is an emerging topic of research, which requires an accurate surface detection. Surface detection capabilities with sub-voxel accuracy based on ISO50 threshold and local adaptive algorithms are required. In addition, accurate detection and measurement of porosity in metal additively manufactured part is needed to quality a part. To aid this effort, PSG is acquiring a software to perform sub-voxel surface detection, coordinate measurements, nominal/actual comparison and porosity measurements. The associated North American Industrial Classification System (NAICS) code for this procurement is 511210- Software Publisher, with a small business size standard of $38.5M. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-95. This requirement is a 100% small business set aside. This is a Brand Name Only Requirement to purchase Volume Graphics VG Studio Max 3.0 Cast and Mold Package Node Locked software licenses. The VG Studio software is the only brand name software with a capability to determine surfaces with sub-voxel accuracy. As dimensional measurements are performed based on the detected surfaces, it is critical to have 1/10 of the voxel size accuracy for the measurements. The VG Studio Mad 3.0 Cast and Mold also provides capability to compare CAD and XCT data. In addition to the dimensional measurements, it is required to measure porosity or inclusive in a part with high confidence. It is necessary to perform both dimensional and porosity measurements in a consistent manner using the same software. VG Studio Max is the only software package capable in accomplishing the project objectives and to reduce accuracies of the dimensional and porosity measurements. SCHDULE OF REQUIRED ITEMS: Contractor shall provide the following Line Item: Line Item 0001- Volume Graphics VG Studio MAX 3.0 Cast and Mold Product ID: PX124530n+ QTY: 1 each Description: VG Studio Max 3.0 Cast and Mold, Node-locked license, including single user VG Studio MAX 3.0 node locked license, the Add-on Modules coordinate Measurements, Nominal/Actual comparison, Wall thickness Analysis, Porosity/Inclusion Analysis and one year update/service agreement Period of Performance: Date of Award - 12 months PROVISIONS AND CLAUSES: The following provisions and clauses apply to this acquisition and are hereby incorporated by reference. All FAR clauses may be viewed at http://acquisition.gov/comp/far/index.html. All Commerce Acquisition Regulations (CAR) clauses may be viewed at http://farsite.hill.af.mil/VFCARA.HTM Provisions: 52.212-1, Instructions to Offerors-Commercial Items 52.212-3, Offeror Representations and Certifications-Commercial Items FAR Clauses: 52.212-4, Contract Terms and Conditions-Commercial Items 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items-Commercial Items including subparagraphs: 52.204-10, Reporting Executive compensation and First Tier Subcontract Awards 52.209-6 Protecting the Governments interest when subcontracting with Contractors debarred, suspended, or proposed for debarment 52.219-6 52.219-13 Notice of Total Small Business Set-aside Notice of Set-Aside of Orders 52.219-28 Post Award Small Business Program Re-representation; 52.222-3 Convict Labor; 52.222-19 Child Labor - Cooperation With Authorities And Remedies; 52.222-21 Prohibition of Segregated Facilities; 52.222-26 Equal Opportunity 52.222-36 52.222-36, Equal Opportunity for Workers with Disabilities; 52.222-50 52.223-18 Combating Trafficking in Persons Encouraging Contractor Policies to Ban Text Messaging While Driving 52.225-13 Restriction on Certain Foreign Purchases; 52.232-33 Payment by Electronic Funds Transfer-System for Award Management Commerce Acquisition Regulations (CAR) Clauses: 1352.201-70, Contracting Officer's Authority 1352.209-73, Compliance With the Laws 1352.209-74, Organizational Conflict of Interest 1352.215-72, Inquiries Offerors must submit all questions concerning this solicitation in writing to the Contracting Officer. Questions should be received no later than 12:00 pm EST, 5 calendar days prior to submission deadline. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Requests shall include complete company name, address, telephone and e-mail address. FAX AND OR PHONE REQUESTS ARE NOT AUTHORIZED AND WILL NOT BE ACCEPTED. 1352.233-70, Agency Protests (APR 2010) (a) An agency protest may be filed with either: (1) The contracting officer, or (2) at a level above the contracting officer, with the appropriate agency Protest Decision Authority. See 64 FR 16,651 (April 6, 1999). (b) Agency protests filed with the Contracting Officer shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: ABDUL KUDUS-YAHAYA, CONTRACTING OFFICER 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (c) Agency protests filed with the agency Protest Decision Authority shall be sent to the following address: NIST/ACQUISITION MANAGEMENT DIVISION ATTN: HEAD OF THE CONTRACTING OFFICE (HCO) 100 Bureau Drive, MS 1640 Gaithersburg, MD 20899 (d) A complete copy of all agency protests, including all attachments, shall be served upon the Contract Law Division of the Office of the General Counsel within one day of filing a protest with either the Contracting Officer or the Protest Decision Authority. (e) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, NW. Washington, DC 20230 FAX: (202) 482-5858. (End of clause) 1352.233-71, GAO and Court of Federal Claims Protests (APR 2010) (a) A protest may be filed with either the Government Accountability Office (GAO) or the Court of Federal Claims unless an agency protest has been filed. (b) A complete copy of all GAO or Court of Federal Claims protests, including all attachments, shall be served upon (i) the Contracting Officer, and (ii) the Contract Law Division of the Office of the General Counsel, within one day of filing a protest with either GAO or the Court of Federal Claims. (c) Service upon the Contract Law Division shall be made as follows: U.S. Department of Commerce Office of the General Counsel Chief, Contract Law Division Room 5893 Herbert C. Hoover Building 14th Street and Constitution Avenue, NW. Washington, DC 20230 FAX: (202) 482-5858. (End of clause) NIST Local Clause_04 Billing Instruction NIST prefers electronic Invoice/Voucher submissions and they should be emailed to [email protected]. (b) Each Invoice or Voucher submitted shall include the following: (1) Contract Number. (2) Contractor Name and Address. (3) Date of Invoice. (4) Invoice Number. (5) Amount of Invoice and Cumulative Amount Invoiced to-date. (6) Contract Line Item Number (CLIN). (7) Description, Quantity, Unit of Measure, Unit Price, and Extended Price of Supplies/Services Delivered. (8) Prompt Payment Discount Terms, if Offered. (9) Any other information or documentation required by the contract. (c) In the event electronic submissions are not used, The Contractor shall submit an original invoice or voucher in accordance with the payment provisions of this contract to: NIST: Accounts Payable Office 100 Bureau Drive, Mail Stop 1621 Gaithersburg, MD 20899-1621. (End of clause) NIST LOCAL-41, Software Licenses Addendum a) This Addendum incorporates certai11 terms and conditions relating to federal procurement actions. The terms and conditions of this Addendum take precedence over the terms and conditions contained in any license agreement or other contract documents entered into between the parties. Governing Law: Federal procurement law and regulations, including the Contract Disputes Act, 41 U.S.C. Section 601 et.seq., and the Federal Acquisition Regulation (FAR), govern the agreement between the parties. Litigation arising out of this contract may be filed only in those having jurisdiction over federal procurement matters. Attorney's Fees: Attorney's fees are payable by the federal government in any action arising under this contract only pursuant to the Equal Access in Justice Act, 5 U.S.C. Section 504. No Indemnification: The federal government will not be liable for any claim for indemnification; such payments may violate the Anti-Deficiency Act, 31 U.S.C. Section 1341(a). Assignment: Payments may only be assigned in accordance with the Assignment of Claims Act, 31 U.S.C. Section 3727, and FAR Subpart 32.8, "Assignment of Claims." Invoices: Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. Section 3903) and Office of Management and Budget (OMB) Circular A-125, Prompt Payment. Patent and Copyright Infringement: Patent or copyright infringement suits brought against the United States as a party may only be defended by the U.S. Department of Justice (28 U.S.C. Section 516). Renewal of Support after Expiration of this Award: Service will not automatically renew after expiration of the initial term of this agreement. Renewal may only occur in accord with (1) the mutual agreement of the parties; or (2) an option renewal clause allowing the government to unilaterally exercise one or more options to extend the term of the agreement. (End of clause) Addendum to Far 52.212-1, Quotation Preparation Instructions: 1. Price Quotation- The Offeror shall propose a firm-fixed-price for all Line Items. 2. Technical Quotation- All offerors shall provide documentation showing that they are authorized resellers or distributors of the product(s) they are proposing or are the Manufacturer. Award will not be made to any offeror without the requested documentation. All quotations shall clearly comply with the Schedule of Required Items. 3. All offerors shall submit the information/documentation required by the provisions in this solicitation. Quotation Evaluation: The Government intends to award a purchase order resulting from this solicitation to the lowest price Offeror meeting technical acceptability requirements. To be technically acceptable, the quotation must clearly demonstrate compliance with the requirements. The Government will evaluate quotations based on the following evaluation criteria: (1) Technical Capability and (2) Price. 1. Technical Capability An offeror's failure to quote all of the products/services listed above may be considered indicative of the offerors lack of understanding of the Government's requirements and may result in the offer being determined unacceptable. If an evaluation of Non-Acceptable is received, the Offeror will not be considered for Award. An evaluation of Technically Acceptable / Non-Acceptable will be assigned upon completion of the technical quotation evaluation. Offerors who fail to provide sufficient information (e.g. documentation, specifications, etc.) that clearly demonstrates an ability to meet the Government's technical specifications will be considered non-acceptable. If an evaluation of Non-Acceptable is received, the Offeror will not be considered for Award. All offerors must be authorized to sell and service the products they are proposing to the Government, by the original manufacturer(OEM) certified engineers or technicians. 2. Price Price will be evaluated for reasonableness. Your company is encouraged to discount its rates. If price discounts are offered, identify the percentage of price discount and/or price reduction offered. The Government does not intend to enter into discussion and may award a purchase order on the basis of initial offers received, without discussions. Therefore, each initial quotation shall contain the offeror's best terms. Nonetheless, the Government reserves the right to conduct discussions if it is in the best interest of the Government. Due Date and Response Information Offerors capable of furnishing the specified repair in this combined synopsis/solicitation should submit their quote in writing to: Prateema Carvajal electronically at [email protected]. FAX quotations shall not be accepted. Offerors shall submit their quotations so that NIST receives them not later than June 29, 2017, 8:00 am, EST.