Precast Concrete Stationary Infantry Target Emplacements

PRECAST CONCRETE STATIONARY INFANTRY TARGET (SIT) EMPLACEMENTS, 85EA. Emplacements shall be constructed to meet US Army Corps of Engineers Specifications (drawings attached). General Notes: 1. Concrete shall develop a minimum compressive strength of 28 MPSa (4000psi) in 28 days. 2. Emplacements shall be constructed of reinforced concrete; concrete structures shall be precast structure will have lifting eyes cut flush. 3. All reinforcing steel shall be per ASTM A615, Grade 60. 4. Place treated timbers against concrete wall on L102mm x 102mm x 12.7mm x 102mm (4"x4"x 1/2" x4") steel angles spaced a maximum of 914mm (3') on center. Attach angle to concrete with concrete anchors. 5. All dimensions are indicated as follows: metric units (English) for instance, 1372mm (4'6"). 6. Horizontal control point (A) is located on the left side of target as view from the firing position 7. Provide 13mm (1/2") chamfer on all exposed concrete surfaces. 8. Label each emplacement. Coordinate with Range Control POC for additional information is SGT William Baughn at [email protected] and for numbering scheme. Basis for award is low price that meets the minimum requirements (the characteristics and level of quality) that will satisfy the Government's needs.