130hp CTL - MID-COLUMBIA NWR, WA

130hp CTL - MID-COLUMBIA NWR, WA This is a Brand Name or Equal requirement for a Cat 275 XE (with delivery) with the following attachments: 1. Standard 4 in 1 Bucket 86 inch with bolt on cutting edge 2. Forestry Package/Land Management (Guarding, poly carbonate doors, etc) 3. Installed Ansul liquid Fire Suppression System that can be activated remotely or inside the cab. 4. Mulcher - Mulching head with Dual speed motor 72"cutting width, rated for machines HP and Flow. CTL to be provided should conform to the highlighted items in the attached salient characteristics sheet. Please note that the minimum engine hp rating is 130. Products with a lower rating will not be considered. Note on Fire Suppression system: The machine must be equipped with a fire suppression system to reduce the risk of a total loss in the event of an incident. Over the past two years, there have been multiple reports of machine fires that have resulted in the total loss of valuable equipment investment. A fire suppression system represents a proactive and worthwhile investment to help safeguard both the machine and its operator by significantly reducing the likelihood and impact of a fire. Vendor is asked to provide along with pricing: A. Vendor must have be a permanent manufacturer approved service facility within 60 miles of CTL's delivery location. Vendor will provide the location of the permanent service facility. B. Vendor confirms the engine rating with high flow attachment connected is at least 130 hp. Provide a specifications sheet of the CTL to be provided. Provide a specifications sheet of the CTL to be provided that demonstrates it meets the salient characteristics. Provide your response with your CAGE code to [email protected] with the solicitation number and location in the subject line Please review the solicitation packet and salient characteristics sheet.