THE USCG SURFACE FORCES LOGISTICS CENTER, LRE PRODUCT LINE HAS A REQUIREMENT TO PROCURE THE ITEM NOTED BELOW. QUOTES MAY SUBMITTED BY EMAILTO
[email protected]. THE CLOSING DATE AND TIME FOR RECEIPT OF QUOTE IS July 15, 2022 at 12:00 pm EST. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333120. This synopsis/solicitation is issued pursuant to FAR 6.203-1 and HSAM 3006.302-1. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.5. FAC 2021-07 dated 9/10/21. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid UEI numbers and be registered with System for Award Management (SAM) and shall provide the company Tax Information Number (TIN) with their offer. Substitute part numbers are NOT acceptable. It is anticipated that purchase order shall be awarded as a result of this synopsis/solicitation. It is the Governments belief that only HYDRALIFT AMCLYDE, INC and/or their authorized distributors can obtain the required technical and engineering data, and genuine OEM parts, required to provide these items. Concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (2) calendar days from the day this notice is posted. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor, and verifying the OEM will supply genuine OEM parts. The items are used on various US Coast Guard vessels. Substitute part numbers are NOT acceptable. AWARD WILL BE BASED ON AN ALL OR NONE QUOTE. ITEM #1: NSN: 2920-01-660-2607 DESCRIPTION: END FRAME, NON DRIVE END KIT PART NUMBER: 11466469-001 MANUFACTURER NAME: Hydralift Amclyde, Inc PACKAGING SPECIFICATIONS: 11466469-001 MODIFICATION;INSTALLATION END FRAME;NON DRIVE END 3 RTD'S HTS: 8503.00.9550 ECCN: US-EAR99 INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MIL-STD-129R PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: MIL-STD-2073-1E & MIL-STD-129R DATED: 01/22/22. INDIVIDUALLY IN WOOD CRATES & LABELLED INDIVIDUAL PACK & MARK ___YES ___NO BAR-CODE___YES ___NO QTY: 6 EA UNIT PRICE: $___________________ TOTAL COST: $__________________ ITEM #2: NSN: 2920-01-660-2601 DESCRIPTION: END BELL, ELEC ROTATING EQUIP PART NUMBER: 11466477-001 MANUFACTURER NAME: Hydralift Amclyde, Inc PACKAGING SPECIFICATIONS 11466477-001 MODIFICATION;INSTALLATION END FRAME;DRIVE END 3 RTD'S HTS: 8503.00.9550 ECCN: US-EAR99 INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1 E METHOD 10, CUSHIONED IN A BUBBLE WRAP, AS NEEDED, UTILIZING CUSHIONING, BLOCKING AND BRACING AND BAGGED. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING, ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH TYPE II OR III OF MIL-D-3464. ALL PACKED IN AN APPROPRIATELY SIZED ASTM-D6251 TYPE III, CLASS 1 WOOD-CLEATED PANELBOARD SHIPPING BOX OR ASTM-D6880 CLASS 2 HEAVY DUTY SCREWED WOODEN BOX. MARKING IAW MIL-STD-129R PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: MIL-STD-2073-1E & MIL-STD-129R DATED: 01/22/22. INDIVIDUALLY IN WOOD CRATES & LABELLED INDIVIDUAL PACK & MARK ___YES ___NO BAR-CODE___YES ___NO QTY: 6 EA UNIT PRICE: $___________________ TOTAL COST: $__________________ COAST GUARD’S REQUESTED DELIVERY DATE: ON August 19, 2022 or before VENDORS PROMISED DELIVERY: __________ARO (Day / Week / Month) The item(s) is/are used on various US Coast Guard vessels. Substitute part numbers are NOT acceptable. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. CREDIT CARD: _____YES_____NO PURCHASE ORDER: _____YES_____NO PAYMENT TERMS: ______________ SMALL BUSINESS: ___YES ___NO VENDOR NAME: ______________________________________________ VENDOR ADDRESS: ______________________________________________ _______________________________________________ VENDOR POC: ____________________________________________________ PH: _________________________________ FAX: ________________________ EMAIL: ___________________________________________________________ *TIN NO: ____________________________________ (Required – Must be Included) *UEI NO: __________________________________ (Required – Must be Included) ACTIVE IN SYSTEM FOR AWARD MANAGEMENT (REQUIRED FOR AWARD) (www.sam.gov): _______YES ________NO Part covered under GSA Contract _____YES______NO (if yes, mark below) CONTRACT NUMBER: ______________________ Note: FOB Destination pricing is preferred: * Estimated shipping: $___________ (MUST BE INCLUDED, if not FOB Destination) *If FOB Origin pricing (City, State): ______________________________________ *SHIP TO: United States Coast Guard SFLC Receiving Room – BLDG 88 2401 Hawkins Point RD Baltimore, MD 21226 NOTE: PRESERVATION, PACKING, & MARKING SHALL BE IN ACCORDANCE WITH SPECIFICATIONS: AS NOTATED ABOVE WITH SPECIFIC ITEM It is anticipated that a purchase order shall be awarded as a result of this synopsis/solicitation. THIS AWARD WILL BE BASED ON PRICE. OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The Offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal. (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (OCT 2018); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (OCT 2018) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offeror may obtain full text versions of these clauses electronically at www.ecfr.gov 52.212-5 -- Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items (MAY 2019) Title 48: Federal Acquisition Regulations 3052.209-70 Prohibition on contracts with corporate expatriates The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the SAM database to ensure it is current, accurate and complete. Contractors may obtain information on registration and annual confirmation requirements via the SAM accessed through https://www.acquisition.gov or by calling 866-606-8220, or 334-206-7828 for international calls.