Brand Name Only PaperSpray Ionization Source

This synopsis is hereby amended to update the quantities of products being synopsized. The previous requirement listed the following all at a quantity of 1 ea: Line Item 0001: P/N VSIS1-10000- VeriSpray Ion Source Line Item 0002: P/N VSPM1-1000- Plate loader and magazine Line Item 0003: P/N VSMZ1-10000- Verispray magazine Line Item 0004: P/N 701-057882- Win 7 to Win 10 LCMS migration Line Item 0005: P/N VSSP1-10000- Verispray sample plates(10) The CORRECTED and updated NIST requirement is as follows: Quantity 1: Line Item 0001: P/N VSIS1-10000- VeriSpray Ion Source Quantity 1: Line Item 0002: P/N VSPM1-1000- Plate loader and magazine Quantity 2: Line Item 0003: P/N VSMZ1-10000- Verispray magazine Quantity 1: Line Item 0004: P/N 701-057882- Win 7 to Win 10 LCMS migration Quantity 12: Line Item 0005: P/N VSSP1-10000- Verispray sample plates(10) Due to this amendment and the previous RFQ closing date of 8/25/2021, the due date for quotation is hereby extended until 8/30/2021, 1:00 PM EST. Now additional changes have been made. COMBINED SYNOPSIS/SOLICITATION Brand Name Only PaperSpray Ionization Source This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 – Streamlined Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested, and a separate written solicitation document will not be issued. This solicitation is being issued under the authority of FAR Part 13 Simplified Acquisition Procedures. The due date for quotation is Aug 25 th 2021, 1:00pm EST This solicitation is a Request for Quotations (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-06 effective July 12th, 2021. The associated North American Industrial Classification System (NAICS) code for this procurement shall be 334516 - Analytical laboratory instrument manufacturing with a small business size standard of 1000 employees. This acquisition is being procured as a Brand Name Only, 100% Small Business set aside competition The NIST Surface and Trace Chemical Analysis Group (STCAG) of the Materials Measurement Science Division (MMSD) of the Materials Measurement Laboratory (MML) has significant research efforts in the fields of forensic science and homeland security. One of the major focuses of these efforts surrounds development, evaluation, and quantification of standard test materials (TMs) for a suite of trace detection technologies. Another major program is the quantification of trace level drug residues in operational environments. NIST requires the purchase of an PaperSpray Ionization Source to further the group’s mission. BRAND NAME ONLY The only system identified through market research capable of allowing for full interoperability with the existing mass spectrometer is the VeriSpray ionization source which is manufactured by ThermoFisher Scientific. No other paperspray sources were found that were capable of being controlled by the existing Xcalibur or Chromeleon software, which means they would not be capable of fully integrating with the existing NIST Owned mass spectrometer. The system must be able to be run off of XCalibur or Chromeleon software, which is the native software for the Thermo TSQ Quantis system. The VeriSpray Ion Source manufactured by ThermoFisher of Madison, WI has been identified as being capable of meeting all of the Government requirements. ITEM: VeriSpray Ion Source with plate loader, magazine, sample plates(10), and software. Offerors may propose another item but must include with their proposal documentation that demonstrates that it meets the specifications. Documentation must include drawings, diagrams, brochures or other literature that demonstrates these salient characteristics. Failure to provide such documentation will cause the proposal to be unacceptable. Responsible quoters shall provide pricing for the following Line Items meeting all the salient characteristics within the attached Requirements document.: Line Item 0001 : P/N VSIS1-10000- VeriSpray Ion Source Line Item 000: P/N VSPM1-1000- Plate loader and magazine Line Item 0003: P/N VSMZ1-10000- Verispray magazine Line Item 0004: P/N 701-057882- Win 7 to Win 10 LCMS migration Line Item 0005: P/N VSSP1-10000- Verispray sample plates(10) DELIVERY Delivery: Shall be FOB DESTINATION and shall occur within 60 days. However, due to current to access restrictions delivery shall not take place until the contractor coordinates with the designated Technical Point of Contact (TPOC) and Contracting Officer (CO). Prior to shipment, the Contractor must ensure NISTs campus is open and accepting deliveries. If the restrictions of access to the campus impacts delivery schedules, a modification may be executed by the CO to establish an extended delivery timeframe. The items shall be shipped F.O.B. Destination to: NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY 100 Bureau Dr. Gaithersburg, MD. 20899-1640 FOB DESTINATION MEANS: The contractor shall pack and mark the shipment in conformance with carrier requirements, deliver the shipment in good order and condition to the point of delivery specified in the purchase order, be responsible for loss of and/or damage to the goods occurring before receipt and acceptance of the shipment by the consignee at the delivery point specified in the purchase order; and pay all charges to the specified point of delivery. ACCEPTANCE CRITERIA AND PAYMENT Government Acceptance: Acceptance will occur after the Government Technical Point of Contact has confirmed that all minimum requirements in this document have been met. Payment: Advance payment is not authorized. Partial Payments are not authorized. The contractor may submit and invoice after Government acceptance has occurred. Questions regarding this Synopsis/Solicitation can be emailed to [email protected] EVALUATION CRITERIA AND BASIS FOR AWARD The Government intends to award a purchase order resulting from this solicitation to the responsible quoter whose quotation, conforming to the solicitation, is the lowest price, technically acceptable quotation. Technically acceptable means that the Contractor’s provide equipment meeting the minimum requirements in the requirements document. Price will be evaluated for all quoters whose quotations are determined technically acceptable. Price will be evaluated to determine that total price is consistent with the technical portion of the quotation and is a fair and reasonable overall price to the Government. The Contracting Officer may, if necessary, request revised quotation(s) prior to award. REQUIRED SUBMISSIONS All Contractors shall submit the following: For the purpose of evaluation of Technical Acceptability: Quoters shall provide documentation that demonstrates the quoted product’s ability to meet the minimum specifications in accordance with the requirements document. For the purpose of Price: Quoters shall provide firm-fixed price quotations for Line Items Quoters shall include a completed copy of all required solicitation provisions contained in the attached Applicable Provisions/Clauses document (required provisions are highlighted) Any award resulting from this solicitation will contain the following statement: “The Government’s terms and conditions, identified herein, shall be the prevailing terms and conditions governing this award. In the event of a conflict between the Government’s and contractor’s terms and conditions, the Government’s terms and conditions take precedence.” If the Contractor objects to any of the terms and conditions contained in this solicitation, the contractor shall state “The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:” [Contractor shall list exception(s) and rationale for the exception(s)]. It is the sole responsibility of the Contractor to identify in their quote any exceptions to the terms and conditions of the solicitation. If the contractor does not include such a statement, the submission of a quotation in response to this solicitation will be regarded as the Contractor’s acceptance of the Government’s terms and conditions for inclusion into the resultant purchase order as prevailing. Quoters shall provide an active DUNS # for the System for Award Management (SAM) registration. Quoters must have an active registration at www.SAM.Gov in order to be technically evaluated. Please note that this procurement IS NOT being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If a contractor submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the contractor’s FSS or GWAC contract, and the statement required above shall be included in the quotation; PROVISIONS AND CLAUSES: The clauses and provisions applicable to this solicitation can be found under Applicable Clauses & Provisions. The full text of a FAR provision or clause may be accessed electronically at www.acquisition.gov/far. The full text of a CAR provision or clause may be accessed electronically at htttp://www.osec.doc.gov/oam/acquistion_management/policy/. ATTACHMENTS: The following attachments apply to this solicitation: 1. The Requirements Document 2. Applicable Clauses & Provisions